Syringe Filters. Microfiltration is a membrane technical filtration process which removes contaminants from a fluid (liquid & gas) by passing through a microporous membrane. Membrane filters are surface filters with a precise micro-porous structure. They are used to separate, remove particles or collect micro-organisms for analysis from a fluid.
シリンジフィルター. Aijiren Tech Nalgene シリンジフィルターは、研究向けの清澄化および滅菌ニーズに対応するよう製造されています。. 当社フィルターはさまざまな種類のサイズとメンブレンをご用意しており、滅菌やそれ以外のラボ用途に簡単にご使用
Syringe filters are single use, self contained, filtration devices that are typically used to remove contaminating particulate from liquids or gasses. When selecting the correct syringe filter for an application there are a number of factors to consider, these include: Filter and housing materials. Pore size. Effective filtration area.
Choosing the Correct Syringe Filter At Ossila, we offer five different membrane materials for our syringe filters: Hydrophobic PTFE (Polytetrafluoroethylene) Hydrophilic PTFE Hydrophobic PVDF (Polyvinylidene fluoride) PES (Polyethersulfone) Nylon PTFE can be used with almost any solvent due to its low reactivity and low extractables.
A syringe filter (sometimes called a wheel filter if it has a wheel-like shape) is a single-use filter cartridge. It is attached to the end of a syringe for use. Syringe filters may have Luer lock
2019/07/18 · The absorbed dose is determined by product density, pack size, dose rate, exposure time and to some degree by plant design. We offer an extensive assortment of sterile syringe
Whatman ® Uniflo syringe filters are disposable filtration devices for removing solids from liquid samples prior to analyses such as HPLC and UV/Vis spectrophotometry. They are available in
2022/01/25 · Red polytetra fluorethylene syringe filters Camlab Choice PTFE filters are red with a chemical compatibility of pH 1-14 and are available in sterile and non-sterile packs. These
Minisart RC15-AC Syringe Filter SM17761ACK 50 Pcs 0.2μm 17761--------ACK. It is syringe filter unit which can perform filter sterilization, excluding particle and clear filtration easily. It is individual sterilization packing which can be used immediately. 1 products found.
ABLUO® Syringe Filters Rapid filtration of aqueous and organic solutions. High quality membranes for the elimination of contaminants. Low volume of liquid retained and greater effective filtration area. Buy on Amazon Buy on Amazon USA Product Specifications Ask for information Properties Increased throughput and speed of sample preparation.
Corning® 28 mm Diameter Syringe Filters, 0.2 µm Pore SFCA-PF Membrane, Sterile, Individually Packaged, 50/Case 1 / Pk 50 / Cs Corning® $195.46 per case Add to cart 431219 Corning® 28 mm 1 / Pk 50 / Cs $167 .39
Minisart ® NML Syringe Filters provide the optimal method for clarification and sterilization of liquids, robustly removing bacteria and particles, without any impact on product quality or loss
Non-Sterile: 30mm Syringe Filters Non-Sterile: 25mm Syringe Filters Non-Sterile: 13mm Syringe Filters Non-Sterile: 50mm In-Line Filters Non-Sterile: Cellulose Acetate Non-Sterile: Hydrophilic
With low extractables and low analyte-binding membranes, Millex® syringe filters are the most convenient, highest-quality syringe filters for sensitive instrumental analyses, including gas, liquid, and ion chromatography. Wide chemical compatibility enables their use with virtually any sample composition. Choose and Order Filters
8 小时前 · Most syringe filters have a luer lock, which is a small mechanical device that helps to keep the needle in place. To use a syringe filter with a luer lock, first remove the cap from the filter. Then, insert the needle into the filter. Next, twist the luer lock clockwise until it is tight. Finally, inject the solution into the filter.
Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 8mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1pack
Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 9mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1pack
Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 10mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1pack
Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 11mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1pack