Acrodisc Syringe Filter 4mm 0.45um. 4mm diameter. Hydrophobic PTFE membrane. Polypropylene support. Chemically compatible. HPLC certified for low level UV-absorbing extractables. Female Luer-Lok inlet. Male slip Luer outlet.\<10uL hold-up volume. 75psi pressure. Nonsterile autoclavable. 1.3. $1,389.29 4472

The well depth of a 96 well MultiScreen plate is 1.245 cm. The well depth for a 384 well MultiScreen plate is 1.2 cm. The maximum working volume of a 96 well plate is 300 ul. The maximum working volume for a 384 well plate is 100 ul. Combine the cost savings of bulk media with the convenience of 96-well filtration plates.

Filter Media: GH Polypro membrane (GHP, hydrophilic polypropylene) Housing: Polypropylene ; GxF Prefilter: Binder-free borosilicate glass . Pore Size GHP Membrane: 0.2 and 0.45 μm ; Glass Fiber: 1 μm ; GxF Prefilter: 40 - 1 μm . Effective Filtration Area 13 mm: 1.0 cm 2; 25 mm PSF: 3.9 cm 2 . Sample Volume 13 mm: < 10 mL ; 25 mm PSF: < 150 mL

STEP 2: What is the volume of your sample? Nature of Sample Aqueous GHP* universal Nylon PVDF PES Non Polar CR/ PTFE GHP Protein GHP GH PVDF Ion Chromatography IC * For samples with laden particulate that are difficult to filter, it is best to use a syringe filter with a glass fiber pre-filter over the membrane. These are available in GHP and

Pall GHP Polypropylene membrane will be discontinued effective October 31st, 2019. This discontinuation affects devices including Centrifugal Devices, Syringe Filters, Filter Plates, and Membrane Filter Discs.

Millex-FG, 0.20 µm, hydrophobic PTFE, 25 mm, A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane, ethylene oxide sterilized. Millex-SV 5.0 µm, A 25 mm diameter sterile syringe filter with a 5 µm pore size hydrophilic PVDF membrane. Comes in a pack of 50.

particles. For each sample volume, the most convenient handling method is offered. To this end, 40 ml sample volumes are processed manually with LentiSELECT 40, while LentiSELECT 500 and 1000 are pump driven kits. LentiSELECT advantages Fast and easy virus purification – Purification completed in one to six hours, depending on sample volume

Pall GHP Polypropylene membrane will be discontinued effective October 31st, 2019. This discontinuation affects devices including syringe filters, filter plates, centrifugal devices and membrane filter discs. Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either

This product has a molecular-weight cutoff of 3K, and can be used for processing sample volumes up to 0.5 mL. Features of Pierce Protein Concentrators PES: • Rapid protein concentration —sample concentration of 10- to 30-fold can be achieved in 10 minutes or less. • Excellent protein recovery —unique design minimizes membrane fouling

Oct 08, 2018 · c), V out is the volume of the sample, v lipo is the volume of a single liposome, N A is the Avogadro number, [CytcO] is the CytcO concentration in the liposome stock suspension and V aliquot is

MultiScreen HTS filter plates with Durapore PVDF membrane provide a low-binding, inert support for resin/bead-based separations. Plates are available in several pore sizes. Choose one that works for your resin size. Multiscreen filter plates with 1.2µm Durapore membranes are most commonly used with Luminex bead assays.

In this study, the influence mechanism was further studied at the optimum ratio unless otherwise noted. At each time-point, 1 mL sample was withdrawn and centrifugated at 12, 000 g for 10 min, and then filtered through 0.22 µm membrane filter before nitrate and nitrite quantification. 2.2.

Pall Filter Plate 96-WELL Ghp PK10 5021 . standard grade GH Polypro membrane sample volume less 10ul ... The majority of the target analytes Membrane disc filters

Mar 20, 2017 · The fibrils were trapped on the filter membranes (retentate) by filtration applying vacuum for 10 s on a low-binding AcroPrep 96-well filter plate (plate housing – Polypropylene) embedded with a Versatile GH Polypro membrane (GHP – hydrophilic Polypropylene membrane) (Pall Life Sciences, Ann Arbor, MI).

A sample loop with a volume of 500 μL is delivered with the ÄKTA™ pure system. The injection valve V9M-J, used in ÄKTA™ pure micro, is optimized for small sample volumes in microliter scale and allows for Sample loops to be filled manually via a syringe. Sample loops with a volume of 10 μL and 50 μL are delivered with the ÄKTA™ pure