Sterile Syringe Filters - Pall Corporation

Syringe filters are sterilized by gamma irradiation, preventing the contamination risk that can result from ethylene oxide sterilization. They are individually blister packed to ensure sterility during storage and handling. Replacing a syringe filter midway through the process may lead to contamination, spills, and workflow disruption.

Syringe Filters | Aijiren Tech Scientific

Cytiva Whatman™ GD/X PTFE Syringe Filters. Processes three to seven times more sample volume than filters without prefilter. Whatman™ GD/X PTFE Syringe Filters are specifically designed for filtration of viscous or otherwise hard-to-filter samples with high solids content. £558.00 – £2430.00.

Syringe Filters for Sterile Filtration | Minisart® | Sartorius

Minisart ® NML Syringe Filters provide the optimal method for clarification and sterilization of liquids, robustly removing bacteria and particles, without any impact on product quality or loss of target molecule. Superior filter areas up to 6.2 cm 2. 0.1µm to 5µm pore sizes. Low adsorption characteristics.

Syringe Filters - Pall Corporation

Syringe filters are single use, self contained, filtration devices that are typically used to remove contaminating particulate from liquids or gasses. When selecting the correct syringe filter for an application there are a number of factors to consider, these include: Filter and housing materials. Pore size. Effective filtration area.

Syringe Filters - CELLTREAT Scientific Products

Filters are molded in the polypropylene housings, providing a reliable seal without the use of adhesives Female luer-lock inlet and male luer slip outlet Color coded by membrane type for easy identification, and membrane material and pore size are printed on the housing Available individually packed in peel-to-open paper/plastic blister packs Also available bulk packed in PVDF, PES, PTFE, and

Disposable Laboratory Syringe Filters | Sterlitech

These syringe filters are available with many different membranes, in both sterile and non-sterile varieties, and with or without pre-filters. You can also find expired sterile syringe filters at discount prices in our Clearance Section. *NOTE: Due to high demand, 13 and 25 mm diameter syringe filters are experiencing increased lead times

Syringe Filters - Sigma-Aldrich

Hold the syringe with the filter pointing up and “top off” by pushing a few drops through the filter. Place the filter tip over the collection container and push the sample through a syringe filter by applying gentle positive pressure. To purge the syringe filter and maximize sample throughput, remove the filter from the syringe and draw air into the syringe. Then reattach the filter and push the plunger to force some of the air through the filter.

Syringe Filters | VWR

Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common syringe sizes, the cartridges remove fragments that would otherwise

VWR® Syringe Filters | VWR

Typical applications are clarification, sterile filtration, sample preparation and sterile venting.Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common syringe sizes, the

Syringe Filters - Aijiren Tech Sci

5335.00 SEK. 13. Cytiva Whatman™ GD/X Sterile PES Syringe Filters. Processes three to seven times more sample volume than filters without prefilter. Whatman™ GD/X Sterile PES Syringe Filters are specifically designed for filtration of viscous or otherwise hard-to-filter samples with high solids content.

Syringe Filters - Filtration - General Lab Supplies - Products

Choose a 13mm diameter barrel for 10mL samples and a 25mm barrel for 100mL samples. For inquiries and assistance, you can reach us at 1 800-878-7654 (Customer Service Line), 707-525-5788 (Local), +31 20 638 05 97 (Europe) or email Sales@CPIInternational.com.

Syringe Filters for Aqueous Solutions

The pore size of your syringe filter is determined by the size of the particles you need to filter out of your aqueous solution. Syringe filters for aqueous solutions are available in these pore sizes: 0.05 µm, 0.10 µm, 0.22 µm, 0.45 µm, 0.70 µm, 0.80 µm, 1 µm, 3 µm, 5 µm, and 10 µm . As a guide, the finer the pore, the more pressure

LINKTOR Syringe Filter Nylon Orangnic Filtration, 25mm

LabZhang 24pcs Syringe Filter,Syringe Lab Filters,Hydrophilic Nylon Membrane 25mm Diameter 0.22um Pore Size,Non Sterile Filtration,Green(nylon-25mm 0.22um) 4.3 out of 5 stars 54 1 offer from $16.99

Whatman Syringe Filters

Select from sterile or nonsterile versions without or with prefilters.Syringe filters are the primary option for analytical sample filtration. Whatman 6894-2504 GD/X 25 mm Syringe Filter, glass microfiber filtration medium, 0.45 um (150 pcs) Regular Price $539.90 Price $468.86. Add to Cart.

syringe filter – syringefilter.com

0.22 micron 0.45 micron syringe filters nylon Nylon PTFE PES GF glass fiber 13mm 30mm 25mm PVDF Polyvinylidene Fluoride Cellulose Acetate Filter syringe filter