Sterile Syringe Filters | SECO

Puradisc™ FP Syringe Filter. Syringe Filter, Puradisc™ FP, 1.2 µm Pore Size, Up to 100 ml, 26 x 34 mm, 30 mm dia Membrane, Cellulose Acetate Membrane, Sterile, Polycarbonate Housing Material, Autoclavable, For Routine Syringe Filtration. Syringe Filter, Puradisc™ FP, 1.2 µm Pore Size, Up to 100 ml, 26 More SECO Part #: 12-4458-05.

Syringe Filters for Sterile Filtration | Minisart® | Sartorius

Minisart ® NML Syringe Filters provide the optimal method for clarification and sterilization of liquids, robustly removing bacteria and particles, without any impact on product quality or loss of target molecule. Superior filter areas up to 6.2 cm 2 0.1µm to 5µm pore sizes Low adsorption characteristics Shop Minisart ® NML Syringe Filters

Syringe Filters | VWR

Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common syringe sizes, the cartridges remove fragments that would otherwise

Glass Fiber Syringe Filter at Thomas Scientific

Foxx Life Sciences. EZFlow 25mm High Particulate Syringe Filters are designed for high throughput filtration of viscous and particle-laden solutions. The syringe filter contains a filter membrane along with a glass fiber pre-filter. The filter membrane is available in PES or Hydrophilic PVDF materials, offered in 0.2µm.

Syringe Filters and Syringeless Filters — Labfilterz

Glass Microfiber Filters without Binders ROBY 25/ GF92 200/PK 8TBSRoby Automated Syringe Filter for automation, 25 mm, glass fiber GF92, 1 µm, 200/pk for robotic ...

syringe filter – syringefilter.com

0.22 micron 0.45 micron syringe filters nylon Nylon PTFE PES GF glass fiber 13mm 30mm 25mm PVDF Polyvinylidene Fluoride Cellulose Acetate Filter syringe filter

Sterile Syringe Filters - Pall Corporation

Syringe filter sizes can accommodate sample volumes from < 2 to 200 mL. For viscous or particulate laden solutions it is possible to improve throughput by using Pall’s syringe filters using a built-in prefilter. Gamma-irradiated individual blister packs ensure sterility; Ergonomic blister packs assure sterile storage, handling, and connections

Non-Sterile Syringe Filters - Pall Corporation

Polypropylene syringe filters are the optimal choice for analytical sample preparation. Pall’s polypropylene non-sterile syringe filter housing is chemically resistant to harsh solvents, is low in extractables and low in API and biomolecular compound adsorption. Chemical compatibility is a critical consideration when selecting a syringe filter.

Syringe Filters for Aqueous Solutions - Support

The pore size of your syringe filter is determined by the size of the particles you need to filter out of your aqueous solution. Syringe filters for aqueous solutions are available in these pore sizes: 0.05 µm, 0.10 µm, 0.22 µm, 0.45 µm, 0.70 µm, 0.80 µm, 1 µm, 3 µm, 5 µm, and 10 µm . As a guide, the finer the pore, the more pressure

Syringe Filters Nylon 13mm Diameter 0.22 um Pore Size Non

Feature: filter diameter: 13mm, pore size: 0.22um, membrane material: nylon , hydrophilic property , no need to moist beforehand, uniform aperture , strong tenacity and adsorb ability, syringe filters for cell culture provide effective filtration for a wide variety of sample types designed with a female luer-lok inlet and male luer-slip outlets

Syringe Filters | Sorbent Technologies, Inc.

CHROMAFIL disposable syringe filters are used for filtration of suspended matter from liquid samples (1–100 mL). The filter can be used for sample preparation for HPLC, GC, ICP, AAS, TOC, DOC, IR, NMR, photometry, and spectroscopy samples to filter out contaminants and extraneous particles that can affect analytical results or clog liquid pathways, frits, etc.

Syringe Filters | Aijiren Tech Scientific

Cytiva Whatman™ GD/X PTFE Syringe Filters. Processes three to seven times more sample volume than filters without prefilter. Whatman™ GD/X PTFE Syringe Filters are specifically designed for filtration of viscous or otherwise hard-to-filter samples with high solids content. £558.00 – £2430.00.

Syringeless and Syringe Filters | Aijiren Tech Scientific

Syringeless and Syringe Filters. Syringe filters and membranes for the removal of interfering materials and fine particles prior to injection; includes filters both with and without syringes; suitable for both aqueous and aqueous-organic samples; often constructed from PVDF or PTFE. Read More. Read Less. Pore Size.

Syringe Filter - Membrane Solutions

MS® Syringe Filters are simply quality filters, well packaged, and offered at a fair and competitive price. The Classic range is available in all of the major membranes including Nylon, PTFE, PES, MCE, PVDF, CA, PP and GF which are supplied in 13mm, 17mm, 25mm and 30mm formats in virgin polypropylene housing.

Syringe Filters - STARLAB

0.22 µm Syringe Filter, Cellulose Acetate (Sterile), Blue, ⌀ 33 mm STARLAB reserves the right to make changes at any time and without prior notice. The content ...