Syringe Filters | Aijiren Tech Scientific

Cytiva Whatman™ GD/X PTFE Syringe Filters. Processes three to seven times more sample volume than filters without prefilter. Whatman™ GD/X PTFE Syringe Filters are specifically designed for filtration of viscous or otherwise hard-to-filter samples with high solids content. £558.00 – £2430.00.

Syringeless and Syringe Filters | Aijiren Tech Scientific

Syringeless and Syringe Filters. Syringe filters and membranes for the removal of interfering materials and fine particles prior to injection; includes filters both with and without syringes; suitable for both aqueous and aqueous-organic samples; often constructed from PVDF or PTFE.

Syringe Filters | Life Science Research | MilliporeSigma

Water and acetonitrile were passed through polypropylene or PTFE syringe filters (as indicated in legend), then used 1:1 (v/v) to prepare the mobile phase for UHPLC. The system was run at 0.25 mL/min for 600 min with backpressure recorded every 50 min. DP represents total change in backpressure after 600 min.

How to Select a Syringe Filter and How to Use it? (2020 Guide)

Feb 17, 2020 · Note: The individually packed sterile syringe filter can be held in the original package to minimize contamination while attaching the syringe. Step 3: Secure the Syringe Filter. Secure the syringe filter using a clockwise motion with luer-lock syringe. DO NOT overtighten. Step 4: Filter the Solution. Hold the assembled syringe and filter it upright.

syringe filter – syringefilter.com

0.22 micron 0.45 micron syringe filters nylon Nylon PTFE PES GF glass fiber 13mm 30mm 25mm PVDF Polyvinylidene Fluoride Cellulose Acetate Filter syringe filter

Syringe Filters - Filtration - General Lab Supplies - Products

Choose a 13mm diameter barrel for 10mL samples and a 25mm barrel for 100mL samples. For inquiries and assistance, you can reach us at 1 800-878-7654 (Customer Service Line), 707-525-5788 (Local), +31 20 638 05 97 (Europe) or email Sales@CPIInternational.com.

Syringe Filters - Aijiren Tech Sci

Designed for ultracleaning of small volume samples for the HPLC or GC analysis. Sartorius Minisart™ SRP Syringe Filters are single-use filtration units with a chemically resistant PTFE membrane and male luer slip outlet. Available in 4, 15 and 25mm diameter filters with 0.2 or 0.45 μm pores. Pricing and Availability.

wwPTFE Syringe Filters - Non-Sterile Syringe Filters

wwPTFE Syringe Filters, 0.2µm, Acrodisc One PSF Syringe Filter, GXF/wwPTFE Membrane Membrane, Autopack tubes, 25 mm (200/pkg)wwPTFE Syringe FiltersNon-Sterile Syringe Filters

Glass Fiber Syringe Filter at Thomas Scientific

syringe filters are for the preparation of hard-to-filter samples. The syringe filters have a pigment-free polypropylene housing to eliminate sample contamination and contain a pre-filtration stack of Whatman GMF 150 (graded density) and GF/F glass microfiber media, which allows users to filter even

Syringe Filters for Aqueous Solutions

The pore size of your syringe filter is determined by the size of the particles you need to filter out of your aqueous solution. Syringe filters for aqueous solutions are available in these pore sizes: 0.05 µm, 0.10 µm, 0.22 µm, 0.45 µm, 0.70 µm, 0.80 µm, 1 µm, 3 µm, 5 µm, and 10 µm . As a guide, the finer the pore, the more pressure

Syringe Filters - CELLTREAT Scientific Products

Filters are molded in the polypropylene housings, providing a reliable seal without the use of adhesives Female luer-lock inlet and male luer slip outlet Color coded by membrane type for easy identification, and membrane material and pore size are printed on the housing Available individually packed in peel-to-open paper/plastic blister packs Also available bulk packed in PVDF, PES, PTFE, and

25 mm Syringe Filters - Biosafe Serum, DNA, Protein

Our 25 mm syringe filters use the identical materials of construction as our entire capsule filter portfolio to ensure streamlined scaling without requalification or revalidation concerns. From our syringe filters with 4 cm 2 of surface area to our 50″ UltraCap ® H.D. filters with up to 3.6 m 2 of surface area, the only thing that changes as

Whatman GD/X Syringe Filters – Prefilter, Non-Sterile | Cytiva

Cytiva's Whatman GD/XP disposable syringe filter, a modification of the GD/X line, uses a polypropylene prefilter stack, making GD/XP suitable for samples that require inorganic ion analysis. Whatman™ Uniflo™ 13mm 0.45 H-PTFE 100/PK. Puradisc 25 mm Polytetrafluoroethylene Syringe Filter, 0.1 µm, nonsterile (1000 pcs)

Syringe Filters - Sigma-Aldrich

Whatman ® Uniflo syringe filters are disposable filtration devices for removing solids from liquid samples prior to analyses such as HPLC and UV/Vis spectrophotometry. They are available in variety of membrane choices with 0.2 μm or 0.45 μm pore sizes, feature a polypropylene overmold housing, and include both sterile and non-sterile options.

Syringe Filters - Aijiren Tech Sci

Designed for ultracleaning of small volume samples for the HPLC or GC analysis. Sartorius Minisart™ SRP Syringe Filters are single-use filtration units with a chemically resistant PTFE membrane and male luer slip outlet. Available in 4, 15 and 25mm diameter filters with 0.2 or 0.45 μm pores. Pricing and Availability.