Millex® Syringe Filters - Sigma-Aldrich

Millex-HV Syringe Filter Unit, 0.45 µm, PVDF, 33 mm, gamma-sterilizable, sterilized, A 33 mm diameter sterile syringe filter with a 0.45 µm pore size hydrophilic PVDF membrane. Comes in a pack of 50. Millex-SV 5.0 µm, A 25 mm diameter sterile syringe filter with a 5 µm pore size hydrophilic PVDF membrane.

Syringe Filter 0.2 at Thomas Scientific

EZFlow 13mm, 25mm, and 33mm Syringe Filters are used for prefiltration, clarification, or fine particulate removal. These syringe filters are available in a variety of filter membrane materials, offered in 0.2µm or 0.45µm pore sizes. The filter membranes are reinforced with polypropylene

High Quality Specialty Syringe Filters | I.W. Tremont

Syringe Filter Capabilities. Beyond the extensive product selection found within our standard syringe filter list, we offer OEM capabilities for engineering, molding and insertion of many additional membrane and membrane/pre-filter options.

Syringe Filters for Sterile Filtration | Minisart® | Sartorius

Minisart ® NML Syringe Filters provide the optimal method for clarification and sterilization of liquids, robustly removing bacteria and particles, without any impact on product quality or loss of target molecule. Superior filter areas up to 6.2 cm 2. 0.1µm to 5µm pore sizes. Low adsorption characteristics.

Syringe Filters - Southern Scientific Lab Supplies

Syringe Filter Cellulose Acetate 25mm, 0.45um,Qty 100 $85.00 $42.50 Syringe Filter Cellulose Acetate 4mm, 0.45um,Qty 200 $90.00 $45.00 Syringe Filter Hydrophobic PP

Syringe Filter Selection Guide - Crawford Scientific

Syringe Filter Selection Guide. Use our quick, interactive syringe filter selection guide to find out what filter is best suited to your analysis. In a few clicks you can submit your recommendations and we will send you a free, personalised sample pack. While you are here you should also look at our filtration products page.

AQ™ Syringe Filters - Microsolv Technology Corporation

These syringe filters are recommended for "pharmaceutical" grade HPLC Sample Prep & Dissolution Testing when GLP and GMP are required. Manufactured with proprietary and various membrane types in 25mm, 13mm or 4mm polypropylene housings. These color coded, syringe filters are also made for laboratories that require consistent, high performance

Syringe Filters • CELLTREAT Scientific Products

Filters are molded in the polypropylene housings, providing a reliable seal without the use of adhesives Female luer-lock inlet and male luer slip outlet Color coded by membrane type for easy identification, and membrane material and pore size are printed on the housing Available individually packed in peel-to-open paper/plastic blister packs Also available bulk packed in PVDF, PES, PTFE, and

Syringe Filters | Aijiren Tech Scientific

Syringe Filters MilliporeSigma™ Millex™-GP Sterile Syringe Filter Units with PES Membrane, 0.22 μm (Research Use Only) Ready-to-use, syringe-driven units designed for sterilizing and clarifying sterile solutions

Nylon Syringe Filters - Sterlitech

It would be expected that syringe filters containing absolute rated membrane media would be approximately equivalent regardless of supplier for filters that have the same size, same membrane material and same pore size rating. This is not the case for syringe filters containing nominally rated media such as glass fiber or nonwoven polypropylene.

Syringe Filters – Glass, PTFE, PES, PP, Nylon, & More

We carry syringe filters made of nylon, glass fiber, polypropylene (PP), polyethersulfone (PES), PVDF, polytetrafluoroethylene (PTFE), cellulose acetate, and more. HPLC Syringe Filters available in two sizes: 13 mm and 30 mm; Two pore sizes: 0.2 µm and 0.45 µm; Glass Fiber syringe filters available in 1.2 and 0.7 µm; Available in 7 color

Syringeless and Syringe Filters | Aijiren Tech Scientific

Syringeless and Syringe Filters. Syringe filters and membranes for the removal of interfering materials and fine particles prior to injection; includes filters both with and without syringes; suitable for both aqueous and aqueous-organic samples; often constructed from PVDF or PTFE.

Syringe Filters | Life Science Research | Merck

Improve signal-to-noise ratios, maintain clean baselines and maximize instrument uptime with trusted Millex® syringe filters. With low extractables and low analyte-binding membranes, Millex® syringe filters are the most convenient, highest-quality syringe filters for sensitive instrumental analyses, including gas, liquid, and ion chromatography. Wide chemical compatibility enables their use with virtually any sample composition.

Syringe Filters

PTFE Syringe Filters. PTFE syringe filters are hydrophobic and chemically resistant to all solvents, acids, and bases. PTFE does not impart any extractables to the filtrate. It's an ideal material for transducer protectors because it blocks water vapor. PTFE is ideal for filtering and de-gassing chromatography solvents.

Syringe Filter, PVDF, 25mm diameter, 0.45um, 10/pk

Sterile Syringe Filter PVDF Hydrophilic Filtration 0.22um Pore Size, 25mm Membrane Diameter Sterile PVDF Membrane Individually Packed 20/pk by Labfil 4.7 out of 5 stars 4 1 offer from $24.99