Syringe Filters Solvent Compatibility Chart 1 Protect any analytical system. 2 Extend LC column lifetime. 3 Achieve more reproducible analyses. 4 Variety of membranes, porosities, and diameters available. 5 Luer lock inlet provides strong, leak-tight syringe connection to withstand filtration pressure.

MF-Millipore ® Membrane Filter, 0.65 µm pore size, 25 mm diameter, mixed cellulose esters (MCE) membrane, hydrophilic, white, 100 discs. View Pricing. AP4004705. Glass Fiber Filter without binder, 0.7 µm pore size, hydrophilic glass fiber, 47 mm diameter. View Pricing.

Universal membrane filter. The GH Polypro hydrophilic polypropylene membrane is ideal for aqueous solutions and offers maximum chemical compatibility for aggressive solvents. 96.5% protein recovery. GH Polypro membrane is a low protein binding membrane. It removes unwanted particulate from samples with high recovery of critical proteins.

25 mm Acrodisc PSF IC Syringe Filter: Optimized to provide consistent results when analyzing ionic species. 150 mL (3.9 cm2) Traditional Acrodisc Syringe Filters 4 mm Acrodisc Syringe Filter: Ideal for filtration when sample size is minimal. 2 mL (0.3 cm2) 13 mm Acrodisc Syringe Filter: Multiple filter selection for both aqueous and solvent

Mobile phase filtration is performed prior to placing the solvent into the solvent reservoir. Buffered mobile phase solvents require daily filtration with a 0.2 μm filter to eliminate microbial growth that could increase the baseline. The primary concern when choosing a solvent filter is solvent compatibility with the filter material.

luer lock ghp membrane effective filtration area 3.9 cm2 a9.6 MKP PE-E Series Capsule Rev2011 – D&D Filtration Nominal Dimensions: Lengths: 3.9 in. (99 mm) – dependent on fitting Female Luer Lock 90 Female Luer Lock 74

Use the information in this table to determine the ability of a specific syringe filter membrane to withstand exposure to a solvent. All concentrations are 100% unless noted. Syringe Filter Membrane Compatibility Chart

GH Polypro (GHP) Membrane Disc Filters All purpose, universal membrane with maximum chemical compatibility for both aqueous solutions and aggressive solvents Specifications Filter Media Hydrophilic polypropylene Pore Size 0.2 and 0.45 µm Typical Thickness

Pall Laboratory. of filter media: hydrophilic nylon membrane for excellent chemical compatibility with esters, bases, and alcohols, without pre-wetting; GHP (hydrophilic polypropylene) membrane for low protein binding; and hydrophilic PVDF (polyvinylidine fluoride) membrane for use in aqueous and non-aggressive,. Compare this item.

From Field to Lab – LAS do Brasil Filter Plates . GHP membrane also has an extremely low autofluorescence Polypropylene. Effective Filtration Area. 0.3 cm2. Dimensions. HPLC and Chromatography Sample Prep – VWR Acrodisc PSF GxF syringe filters with glass/GHP membrane Effective Filtration Area. 3.9 cm2. Inlet/Outlet Connections.

Choose a filter or membrane based on: 1) Chemical compatibility of the membrane and housing with your sample matrix. 2) Size and amount of particulates in the sample. 3) Potential interactions (binding) between the membrane and sample components. 4) Special considerations such as requirement for prefilter or inorganic ion certification.

Certified pall ghp effective filtration area 3.9 cm2 PALL ACRODISC SYRINGE FILTERS - ww-w.vgdusa.com Pall AcroDisc Syringe Filters shipped worldwide by VOIGT GLOBAL DISTRIBUTION INC PO Box 1130, Lawrence, Kansas 66044 USA Toll Free in the USA: 877-484-3552 or 1.785.393.8509

While our complete compatibility table features recommendations for over 85 solvents, solutions, and gases, we have highlighted the most common materials used with our filtration products in the corresponding sections below. Materials used to fabricate Millipore ® membranes and filtration devices. Millipore ® ultrafiltration products and

Membranes designed for stringent requirements. Mobile phase filtration is performed prior to placing the solvent into the solvent reservoir. Buffered mobile phase solvents require daily filtration with a 0.2 μm filter to eliminate microbial growth that could increase the baseline. The primary concern when choosing a solvent filter is solvent

Mobile phase filtration is performed prior to placing the solvent into the solvent reservoir. Buffered mobile phase solvents require daily filtration with a 0.2 μm filter to eliminate microbial growth that could increase the baseline. The primary concern when choosing a solvent filter is solvent compatibility with the filter material.