Maximum Operating Pressure: 2.1 bar; Maximum Operating Temperature: 55°C; Pall® Laboratory products are designed for laboratory applications only. This product is not approved for use in medical, clinical, surgical or other patient applications. If you require further assistance in product selection for your chosen application, please contact Pall®.

Maximum Operating Temperature: 55 °C (131 °F) Maximum Operating Pressure: 6.2 bar (620 kPa, 90 psi) Typical Water Flow Rate: 60 mL/min at 2.1 bar (210 kPa, 30 psi) Typical Hold-Up Volume (with air purge): < 50 Μl. Endotoxin Level: < 0.25 EU/mL using Limulus Amoebocyte Lysate (LAL) test. Features:

For a service temperature below 100 °C/210 °F: A post cure may extend the service life if the operating temperature is within 20 °C/40 °F of the present CR guide maximum temperature for the service. This means that a post cure can be beneficial for solvent applications with a temperature limit of 25-40 °C/80-100 °F.

intended to be a specific recommendation for any individual application. The application limits for pressure, temperature, speed and media given are maximum values determined in laboratory conditions. In application, due to the interaction of operating parameters, maximum values may not be achieved.

Maximum Operating Temperature 82 °C (180 °F) at 2.1 bar (210 kPa, 30 psi) Maximum Operating Pressure 4.1 bar (410 kPa, 60 psi) at 21 - 24 ºC (70 - 75 ºF) 2.1 bar (210 kPa, 30 psi) at 82 ºC (180 ºF) Typical Water Flow Rate 795 mL/min at 1.0 bar (100 kPa, 15 psi) Related Products 47 mm Filter Funnels, Glass HPLC Mobile Phase Filtration

Acrodisc Syringe Filter 25mm 0.45um. Hydrophobic PTFE membrane for exceptional chemical and temperature compatibility. HPLC certified for low level UV-absorbing extractables. Polypropylene housing. Female Luer-Lok inlet standard male slip Luer outlet. \<100uL hold-up volume. 50/pk. 200/cs. 1.4. $718.92. 4219.

HPLC-certified Acrodisc® syringe filters PTFE membrane provides the ultimate in chemical compatibility for ... Maximum Operating Temperature GHP Membrane: 55 ºC ...

Maximum Operating Temperature. 55 °C (131 °F) Minimum Bubble Point - Water. 0.2 µm: 2.9 bar (290 kPa, 42 psi) 0.45 µm: 1.38 bar (138 kPa, 20 psi) Read Less. PERFORMANCE. GH Polypro (GHP) Membrane is Virtually a Universal Membrane for All Applications

Excellent chemical compatibility with esters, bases and alcohols. Specifications Materials of Construction Filter Media: Nylon Housing: Polypropylene Effective Filtration Area 2.8 cm2 Inlet/Outlet Connections Female luer-lok inlet, male slip luer outlet Typical Hold-up Volume (with air purge) < 50 µL Maximum Operating Temperature 55 °C (131 °F)

Polypropylene syringe filters with a hydrophilic FP Vericel polyvinylidene difluoride (PVDF) membrane that wets out immediately and provides broad chemical and solvent compatibility. Designed to protect HPLC columns and instruments from particulate build-up and help eliminate spurious peaks.

Pall Acrodisc Syringe Filter Tuffryn Membrane (polysulfone) is extremely low protein-binding. Pall Acrodisc Syringe Filter Tuffryn Membranes maximum operating temperature: 55°C (131°F). Pall Acrodisc Syringe Filter Tuffryn Membranes fluid retention for 25mm filters is less than 40µL with air purge.

GHP has the broadest chemical compatibility and exhibits minimal protein binding

Pall Ghp Acrodisc 25MM .2 PK-1000 4566 ON SALE . Pall Laboratory Filters, Syringe filters.

Acrodisc® Syringe Filter with HT Tuffryn® Membrane, Pall Gelman Taylor Scientific 12-4616 12-4616-30 Acrodisc Syringe Filter with HT Tuffryn Membrane, Pall Gelman 4496