Hydrogen fluoride (Hydrofluoric acid) is a weak acid that is a precursor to almost all fluorine compounds, including pharmaceuticals such as [DB00472] ().It is used as a chemical reagent in several industrial processes such as oil refinery.

GH Polypro membrane solvent compatibility for sale [66548] GH Polypro (GHP) Membrane Disc Filter 0.45 um 47mm 100 상세 정보를 확대해 보실 수 있습니다. Membrane with Chemical Compatibility for Aqueous Solutions and Aggressive Solvents – Maxim

Filter Media: Supor [hydrophilic polyethersulfone (PES)] membrane; Housing: Polypropylene; Pore Size: 0.2 and 0.45 μm; Effective Filtration Area: 13 mm: 1.0 cm 2; 25 mm PSF: 3.9 cm 2; Sample Volume: 13 mm: <10 mL; 25 mm PSF: <150 mL; Inlet/Outlet Connections: Female luer lock inlet, male slip luer outlet; Typical Hold-Up Volume (with air purge

Investigation of the active biofilm communities on polypropylene filter media in a fixed biofilm reactor for wastewater treatment Journal of Chemical Technology & Biotechnology Iffat Naz

copolymer on a non-woven support) membranes GxF Prefilter: Borosilicate glass Housings: Polypropylene. Effective Filtration Area. 3.9 cm2. Sample Volume < 150 mL. Inlet/Outlet Connections. Female threaded luer inlet, male slip luer outlet. Typical Hold-Up Maximum Maximum Typical Part Pore Volume Operating Operating Water

3.9 Cm2 Effective Filtration Area ; to-filter samples.The GHP hydrophilic polypropylene (GH Polypro) membrane is ideal for maximum chemical compatibility, fast ...

Wettability. Hydrophilic. Effective filtration area. 0.1cm2 for 4mm, 0.8 cm2 for 13mm & 3.9 cm2 for 25mm & 4.6 cm2 for 33mm. Extractable. Very low. To cater the variegated and ever increasing needs and demands of our customers, we are involved in presenting our customers a huge spectrum of Syringe Filters – Nylon.

Polypropylene membrane used in this study is characterized by pore size of 0.2 μm, inside diameter of 0.5 mm, and total surface area of 450 cm2. Filtration was done at temperature 70oC, pressure

Acrodisc PSF Syringe Filters feature a large effective filtration area (3.9 cm 2) for increased sample throughput, ideal for sample volumes of ≤ 150 mL. Pall Acrodisc PSF Syringe Filters are designed to be fully compatible for use with automated robotic handling systems offering reliable and worry-free operation.

Specifications Materials of Construction Filter Media: GH Polypro membrane (GHP, hydrophilic polypropylene) Housing: Polypropylene GxF Prefilter: Binder-free borosilicate glass. Pore Size GHP Membrane: 0.2 and 0.45 m Glass Fiber: 1 m GxF Prefilter: 40 - 1 m Effective Filtration Area 13 mm: 1.0 cm2 25 mm PSF: 3.9 cm2

The effective length of the filaments in each module was 20 cm, providing an active membrane surface area of about 65 cm 2. In all of the tests, the flow configuration of the feed solution was set in “out-to-in” mode, that is, the outer surface of the membranes was exposed to the feed solution, and permeate was collected from the lumen side.

25 mm Acrodisc PSF IC Syringe Filter: Optimized to provide consistent results when analyzing ionic species. 150 mL (3.9 cm2) Traditional Acrodisc Syringe Filters 4 mm Acrodisc Syringe Filter: Ideal for filtration when sample size is minimal. 2 mL (0.3 cm2) 13 mm Acrodisc Syringe Filter: Multiple filter selection for both aqueous and solvent

into filtration setups. This versatile, self-contained device works with a variety of positive pressure laboratory pumps. Cost-effective design for non-critical applications. The plastic construction of the Minimate TFF capsule and chemical compatibility of the Omega™ PES ultrafiltration membrane facilitate cleaning and reuse. Scalable.

Innapropriate filter size will can cause a filter to plug prematurely. Filter pore size is chosen based on the application. If the application requires a sterile fluid, than a 0.22 micron membrane would be used for standard solutions that have bacterial bioburden. A 0.1 micron filter would be used for applications where mycoplasma is a concern.

GH Polypro membrane is the best choice for filtering mobile phases PTFE membrane provides the ultimate in chemical compatibility for filtering harsh chemicals and HPLC mobile phases Application Purification and degassing of mobile phase solvents used in liquid chromatography applications Specifications Filter Media