Maximum Operating Temperature. 55 °C (131 °F) Minimum Bubble Point - Water. 0.2 µm: 2.9 bar (290 kPa, 42 psi) 0.45 µm: 1.38 bar (138 kPa, 20 psi) Read Less. PERFORMANCE. GH Polypro (GHP) Membrane is Virtually a Universal Membrane for All Applications

W-SERIES Operating Temperature Limits Loop Mode Parameter (°F) (°C) Note Indoor Loop HEATING (indoor is hot loop) Minimum ELT/EWT 50 10 0-10VDC modulating water valve required on indoor loop at temperatures < 80°F (27°C), or manual flow reduction at startup Maximum LLT/LWT 130 54

Compete like a pro on the Legion 5i Gen 6 (15″ Intel) gaming laptop. It’s armed with all you need to dominate opponents, from powerful 11 th Gen Intel ® Core processors to fast NVIDIA ® GeForce RTX™ 30 Series graphics. Enjoy top-flight, color-accurate visuals on up to a 15.6″ QHD display with Dolby Vision™, plus Nahimic 3D audio and

Supports resolutions up to 2560 x 1600, 30-bit color depth at 60 Hz, and full HD (1920 x 1080) monitors, 24-bit color depth at 120 Hz

Operating Temperature Limits Loop Mode Parameter (°F) (°C) Note Indoor Heating Minimum ELT 50 10 Reduce flow if necessary during startup. Maximum LLT 130 54 (ICE) Maximum LLT 110 43 Maximum during ICE production (specify ICE duty at order). Outdoor Heating Minimum LWT 37 3 Ground water (open loop) system.

2 The LFCSP package has a reduced operating temperature range of −40°C to +125°C. 3 Maximum deviation between +25 °C readings after temperature cycling between − 55 C and +150 C; guaranteed , not tested. 4 Conditions: constant 5 V, constant 12 5°C; guaranteed, not tested. 5 Leakage current doubles every 10 °C.

Maximum Operating Temperature +135°C Minimum Operating Temperature -55°C Operating Temperature Range -55 to +135°C Shrink Ratio 2:1 Shrunk Diameter 25.4 mm Sleeve Diameter 50.8 mm Sleeve Length 30 cm Sleeve Type Heat Shrink Standards Met UL 224 VW-1 E48762, CSA C22.2 No. 198.1, MIL SAE-AMS-DTL 23053/5 Class 1, IEC 60684-3-212 A&B, BS3G

Absolute Maximum Ratings Recommended Operating Conditions Input Voltage -0.5VDC to +160VDC Input Voltage +95VDC to +140VDC Output power Internally limited Output power 0 to Max. Rated Lead Temperature +300°C for 10 seconds Operating temperature -55°C to +85°C

This temperature equates roughly to the average annual air temperature of the chosen location, usually 7–12 °C (45–54 °F) at a depth of 6 metres (20 ft) in the northern US. Because this temperature remains more constant than the air temperature throughout the seasons, Ground source heat pumps perform with far greater efficiency during

Maximum Temperature Coefficient +350 ppm/°C Minimum Operating Temperature -55°C Minimum Temperature Coefficient -500 ppm/°C Power Rating 1 W Resistance 1 kΩ Technology Carbon Film Temperature Coefficient -500 to +350 ppm/°C Termination Style Axial Tolerance ±5% Lead Length 26 mm Maximum Operating Voltage 400 V Maximum Overload Voltage 800 V

2 The LFCSP package has a reduced operating temperature range of 40°C to +125°C. 3 Maximum deviation between +25 °C readings after temperature cycling between 55 C and +150 C; guaranteed ,not tested. 4 Conditions: constant 5 V, constant 12 5 °C; guaranteed, not tested. 5 Leakage current doubles every 10 °C. Downloaded from Arrow.com.

Maximum EWT Cooling 80 27 NOTES—ELT/LLT: Entering/Leaving Liquid Temperature, EWT/LWT: Entering/Leaving Water Temperature. Values in these tables are for rated liquid and water flow values. Ensure adequate antifreeze protection is present for desired operating temperatures. * Reduce Loop flow until value is reached for startup if necessary.

Operating temperature -55°C to +125°C Operating temperature1-55°C to +70°C Storage temperature -55°C to +125°C For Notes to Electrical Performance Characteristics, refer to page 5 1 Meets de-rating per MIL-STD-975 Electrical Performance Characteristics Parameter Group A Subgroup V Conditions-55°C TC +85°C IN = 28V DC ± 5%, CL= 0 unless

Item Operating Conditions Min. Typ. Max. Unit Operating Temperature Derating when operating temperature≥71°C (see Fig. 1) -40 -- 85 °C Storage Temperature -55 -- 125 Pin Soldering Resistance Temperature Soldering spot is 1.5mm away from case for 10 seconds -- -- 260 Storage Humidity Non-condensing 5 -- 620 %RH

Above 1524 m (5,000 ft) altitude, maximum operating temperature is de-rated by 1° C (1.8° F) per 305 m (1000 ft) elevation increase. Physical security and serviceability Specification