Syringe filters are used in analytical chemistry applications to remove particulate contamination prior to analysis. Filtering a sample prior to sample injection into analytical instrumentation will help protect sensitive parts of the instrument from particulate build-up and reduce system downtime. Sample filtration using syringe filters containing 0.45 μm (HPLC) or 0.2 μm (UHPLC) pore size membranes will also extend the life of chromatography columns by preventing particulate from

Accurate pore size rating – Acrodisc PSF syringe filters are more retentive than standard 25 mm devices and are available with single-layer membranes or multi-layer glass fiber prefilters. Superior HPLC column protection – Better retention efficiency helps extend column life as much as 46 times.

Pore Size 0.45 µm µm nominal Diameter (Metric) 25 mm Effective Filtration Area (Metric) 3.9 cm² Filter Media Glass Fiber / Supor® [hydrophilic polyethersulfone (PES)] membranes Hold-Up Volume <125 µL Housing Material Modified acrylic Maximum Operating Pressure (bar) 4.1 bar Maximum Operating Temperature (Metric) 55 °C Overview Description Type Use

PALL FILTERS - vgdusa\ 10ml sample volume. \10ul hold-up vo. Pall Filter 4485. Ion Chromatography Acrodisc Syringe Filter 0.45um pore size. 13mm diameter.

Acrodisc® syringe filters GHP membrane, diam. 25 mm, pore size 0.45 μm; find -Z259845 MSDS, related peer-reviewed papers, technical documents, Acrodisc® Syringe Filters for Analytical Sample Preparation - Pall Pall's GHP (hydrophilic polypropylene) membrane is a universal solvent membrane to reduce confusion with filter selection.

disc filter ghp membrane sample volume less 10ul Acrodisc Syringe Filters with GHP Membrane, Pore Size 0.45 um Filter Media: Glass Fiber / GH Polypro membrane (GHP, hydrophilic polypropylene) · Housing: Polypropylene · Type: Syringe Filter · Use: Particulate Filter,

Pore Size 0.45 µm µm nominal Diameter (Metric) 13 mm Effective Filtration Area (Metric) 1 cm² Filter Media Nylon Hold-Up Volume <30 µL Housing Material polypropylene Maximum Operating Pressure (bar) 6.9 bar Maximum Operating Temperature (Metric) 55 °C Typical Flow Rate 15 mL/min at 2.1 bar (210 kPa, 30 psi) Overview Description Type Use Reviews

Acrodisc® syringe filters GHP membrane, diam. 25 mm, pore size 0.45 μm; find -Z259845 MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich

Common use ghp acrodisc sample volume less 10ul Popular ghp filters sample volume less 10ul-Lab Consumables high performance pall ghp sample volume less 10ul-Lab GHP Nanosep Various pore in a centrifugal size and device. membrane HPLC certified configurations. for low extractables. 500 L

Pall GHP Polypropylene membrane will be discontinued effective October 31st, 2019. This discontinuation affects devices including syringe filters, filter plates, centrifugal devices and membrane filter discs. Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either

Pore Size: 0.2 and 0.45µm: Effective Filtration Area: 13mm = 1.0cm 2 25mm = 2.8cm 2 25mm Premium = 3.9cm 2: Sample Volume: 13mm is <10mL 25mm is < 100mL 25mm Premium is < 150mL: Inlet/Outlet Connections: 13mm is Female Luer-Lok inlet with minispike outlet. 25mm is Female Luer-Lok inlet with male slip luer outlet: Typical Hold-up Volume (with

Pore Size 0.45 µm µm nominal Diameter (Metric) 25 mm Effective Filtration Area (Metric) 2.8 cm² Filter Media Hydrophobic PTFE Hold-Up Volume <125 µL Housing Material polypropylene Maximum Operating Pressure (bar) 2.1 bar Maximum Operating Temperature (Metric) 100 °C Typical Flow Rate 510 mL/min at 1.0 bar (100 kPa, 15 psi) Overview Description Type

GH Polypro (GHP) Membrane Disc Filters All purpose, universal membrane with maximum chemical compatibility for both aqueous solutions and aggressive solvents Specifications Filter Media Hydrophilic polypropylene Pore Size 0.2 and 0.45 µm Typical Thickness 0.2 µm: 101 µm (4.0 mils) 0.45 µm: 114 µm (4.5 mils) Typical Water Flow Rate mL/min

13 mm Acrodisc Syringe Filters Ideal sample volume ≤ 10 mL Available with a range of membrane chemistries and pore sizes to ensure the best compatibility with your sample and application requirements Minispike version features a unique small outlet tip allowing for easier handling and a reduced hold-up volume, ≤ 14 μL Shop Now 13 mm Syringe Filters

Pore and Device Size The follow chart can be used as a guideline in choosing the pore size and device. Aijiren Technology recommends a 0.2 µm pore size filter for chromatography columns with a 3 µm particle size or less. For sample volumes less than 10 mL, choose a 13 mm diameter Acrodisc filter. Aijiren Technology has created an online tool