Buy Polypropylene membrane roll stock 4.45um pore size 270mm width x 3m length. Shop Tisch Scientific for the highest quality and competitive prices. Polypropylene membrane roll stock, 0.45 um, 270mm (width) x 3m (length), without substrate, RS30423 |Tisch Scientific
Product Category Description: All-purpose, universal hydrophilic polypropylene membrane with maximum chemical compatibility when filtering both aqueous solutions and aggressive solvents. Low protein binding of GH Polypro membrane provides high recovery of critical proteinaceous samples.
GH Polypro (GHP) Membrane Disc Filters Hydrophilic polypropylene membrane with maximum chemical compatibility when filtering both aqueous solutions and aggressive solvents. High recovery of critical proteinaceous samples due to low protein binding. HPLC certified. 47mm diameter. Pore size: 0.45um.
The pore size is usually determined by your application or objective. Mycoplasma removal can be performed using a 0.1 µm pore filter. Routine labora tory sterilization of most media, buffers, biological fluids and gases is usually done with 0.2 or 0.22 µm pore filter membranes. Clarification and prefiltration of solutions and solvents is best
Pore Size 0.2 and 0.45 µm Typical Thickness 127 µm (5 mils) Typical Water Flow RatemL/min/cm 2 at 0.7 bar (70 kPa, 10 psi) 0.2 µm: 12 0.45 µm: 16 Maximum Operating Temperature - Water 100 °C (212 °F) Minimum Bubble Point - Water 0.2 µm: 3.4 bar (340 kPa, 49 psi) 0.45 µm: 2.6 bar (260 kPa, 37 psi) Applications
GH Polypro (GHP) Membrane Disc Filters‚ 0.45um pore size x 47mm diameter‚ 100/pk, 28143-288 Please note, due to volume, carriers have advised of potential delays. We appreciate your patience during this unprecedented time.
GH Polypro (GHP) Membrane Disc Filters Hydrophilic polypropylene membrane with maximum chemical compatibility when filtering both aqueous solutions and aggressive solvents. High recovery of critical proteinaceous samples due to low protein binding. HPLC certified. 25mm diameter. Pore size: 0.45um. 2.00. $121.77. 66548
MF-Millipore ® Membrane Filter, 0.8 µm pore size, 47 mm diameter, mixed cellulose esters (MCE) membrane, hydrophilic, white, 100 discs. 0.8 μm pore size. 82 % porosity. Expand. GTTP02500. Isopore Membrane Filter, 0.2 µm pore size, hydrophilic polycarbonate membrane, 25 mm diameter. 0.22 μm pore size.
Wide range of pore sizes: pore size range of 0.03 μm to 5.0 μm enables specific pore size selection for given applications. Superior burst strength: protects the integrity of the membrane under high pressure. Quality checks ensure lot-to-lot consistency, both down and across the polyester web, for dependable results every time.
GH Polypro membrane standard grade for wholesales-Analytical . 7590-004. PTFE Membrane, WTP Range, 1 µm pore size, 47 mm circle (100 pcs) Parameter. PTFE Membrane, WTP Range, 0.2 µm pore size, 25 mm circle (100 pcs) There are no available product features to display for this product variant.
Hydrophilic Polytetrafluoroethylene membrane type · Available pore sizes are 0.22um and 0.45um · Available diameters are 13mm and 25mm · Compatible with nearly all PALL ACRODISC 25MM Syringe Filters 0.45um Nylon AP-4438T old stock pack of 50 Acrodisc Premium 25mm Syringe Filters with 0.45 Nylong Membranes by Pall Life Sciences.
PTFE Laminated Membrane Filters, 0.45 Micron, 47mm, 100/Pk PTFE Laminated Membrane Filters, 0.45 micron, 47 mm, pack of 100. Hydrophobic, durable ePTFE laminated on to a polypropylene later. Ideal for venting, phase seperations, and aerosol sampling. SKU PTFE04547100 Manufacturer Sterlitech Pore Size 0.45 Diameter (mm) 47 Pack Size 100 $460.29
Hydrophilic polypropylene Pore Size 0.2 and 0.45 µm Typical Thickness 0.2 µm: 101 µm (4.0 mils) 0.45 µm: 114 µm (4.5 mils) Typical Water Flow RatemL/min/cm 2 at 0.7 bar (70 kPa, 10 psi) 0.2 µm: 20 0.45 µm: 31 Maximum Operating Temperature 55 °C (131 °F) Minimum Bubble Point - IPA 0.2 µm: 1 bar (100 kPa, 14.5 psi) 0.45 µm: 0.63 bar (63 kPa, 9.1 psi)
Whatman membrane filters nylon pore size 0.45 um, diam Nylon membranes are hydrophilic, eliminating the need for wetting agents that could be extracted when filtering aqueous solutions. The membranes are flexible, durable and tear resistant, and can be autoclaved at 135ºC.
These Tisch Brand products are manufactured, tested and distributed under our strict quality standards. We also offer sample membrane filters that are readily available and ship from stock in one business day. Whatman 7141-154, WME WHGRST 47MM 0.45 um 1000/PK Regular Price $644.82 Price $560.71 Add to Cart
