Inlet: Female luer-lock: Outlet: Male luer slip: Housing: Polypropylene: Operational: Max. Operating Temperature: 55 °C: Max. Differential Pressure: 75 psi @ 25° C

The Chemlock PP housing has fully molded fittings in several fitting types and sizes, in an extremely compact housing head . design. The Chemlock housing is offered in a universal (nominal 10") length and in a 20" length to accommodate a wide variety of cartridges. Improved Reliability. The cartridge locking feature prevents the cartridge from

Housing: Polypropylene Effective Filtration Area 2.8 cm2 Inlet/Outlet Connections Female luer lock inlet, male slip luer outlet Typical Hold-Up Volume (with air purge) < 50 µL Maximum Operating Temperature 55 °C (131 °F) Maximum Operating Pressure 6.2 bar (620 kPa, 90 psi) Typical Water Flow Rate 60 mL/min at 2.1 bar (210 kPa, 30 psi

Max Operating Temperature: 55°C. Burst Pressure: 12kg/cm 2. pH Range: 3-12. PVDF - Wide Chemical Compatibility - HPLC Certified - Hydrophilic. Advanced Quality PVDF Syringe Filters, AQ™ brand, for Pharmaceutical Grade HPLC & Dissolution Testing. Manufactured with a unique 0.45µm PVDF membrane in a 13mm polypropylene housing, these syringe

Housing: Polypropylene . Effective Filtration Area 2.8 cm 2 . Inlet/Outlet Connections Female luer lock inlet, male slip luer outlet . Typical Hold-Up Volume (with air purge) < 50 μL . Maximum Operating Temperature 55 °C (131 °F) Maximum Operating Pressure 6.2 bar (620 kPa, 90 psi) Typical Water Flow Rate 60 mL/min at 2.1 bar (210 kPa, 30 psi)

Max Continuous Service Temperature. This is the maximum acceptable temperature above which mechanical properties (tensile strength, impact strength) or electrical properties (dielectric strength, linked to insulation properties) of a plastic part are significantly degrading, over the reasonable life time of the tested product.

Polypropylene General Properties English Units SI Units Shore D Scale 55 – 65 55 – 65 ... Vicat Softening Temperature Homopolymer 305 °F 152 °C Copolymer ...

Microfiltration Membrane OPERATING LIMITS Maximum operating pressure 120 psi (8.3 bar) Maximum operating temperature 131°F (55°C) Maximum cleaning temperature 122°F (50°C) Acceptable operating pH range 2.5–10.0 Acceptable short-term cleaning pH range 1.7–11.5 Maximum pressure drop per element 20 psi (1.3 bar)

Inner Core: Polypropylene End caps: Polypropylene Maximum Operating Temperature 176°F ( 80°C) Recommended Change-out Differential Pressure 35 psid (2.4 bar) Maximum Differential (Collapse) Pressure 75 psid @ 70°F (5.2 bar @21°C), 40 psid @176°F (2.8 bar @ 80°C) Sanitization and Sterilization Hot water at 175°F (80°C) at 5 psid for 30

polyethersulfone membrane polypropylene housing. sterility. non-sterile. packaging. Maximum Operating Temperature: 13 mm: 55°C (131°F) 25 mm PSF: 100°C (212°F ...

P R O D U C T S P E C I F I C A T I O N Membrane Diameter: 13 mm Effective Filtration Area: 0.76 cm² Housing Diameter: 18 mm Housing Materials: Polypropylene Inlet / Outlet: FLL / MLS Holdup Volume: <50 microliter Maximum Operating Temperature: PP Abluo - 90°C/194°F, Maximum Operating Pressure: 80 psi Sterile: No

Maximum Operating Temperature GHP Membrane: 55 ºC (131 ºF) PVDF, TF (PTFE), and Nylaflo Membranes: 100 ºC (212 ºF) Minimum Bubble Point – Water GHP Membrane 0.2 µm: 2.9 bar (290 kPa, 42 psi) 0.45 µm: 1.38 bar (138 kPa, 20 psi) PVDF Membrane 0.2 µm: 2.3 bar (230 kPa, 34 psi) 0.45 µm: 1.1 bar (110 kPa, 16 psi) Nylaflo Membrane

Housing Material: Polypropylene: Max Pressure: 0.29 MPa (42 PSI) Membrane Material: Polypropylene: Effective Filtration Area(cm^2) 3.5: Max Operating Temperature : 80 °C (176 °F) Dimension: 30 mm diameter x 30 mm Height: Weight: 12 g

Membrane Material PP(Polypropylene) Membrane Diameter 17mm Housing Diameter 22mm Effective Filtration Area 1.4 CM 2: Housing Material Polypropylene Overmolded Holdup Volume <40 microliter Maximum Operating Temperature 82°C Maximum Operating Pressure 80 psi

Aug 03, 2020 · Therefore, the comparison experiments were carried out at around 37 °C of feed temperature. The permeate temperature was around 22 °C. The maximum operating feed and permeate flow rates that could be used with the M3 module without increasing the relative pressure values were 170 L/h and 250 L/h, respectively.