sizes operating on natural gas at pressures not greater than 7 bar and normally in the temperature range -20 °C to 50 °C. This standard also covers insulation joints used on gas service & riser pipe installations not greater than 7 bar maximum operating pressure whether screwed conforming to BS 1387,

10.3.1 Cast iron sectional boilers. These are used for hot water services with a maximum operating pressure of 5 bar and a maximum output in the order of 1500 kW. Site assembly of the unit is necessary and will consist of a bank of cast iron sections. Each section has internal waterways.

2.1 bar Maximum Operating Temperature (Metric) 100 °C Quantity 50 pkg Typical Flow Rate 510 mL/min at 1.0 bar (100 kPa, 15 psi) Overview Description Type Use Reviews Documents Datasheets Download: English Description Syringe filters are used in analytical chemistry applications to remove particulate contamination prior to analysis.

ghp acrodisc maximum operating pressure 2.1 bar-Lab Home » News » GHP Filter » ghp acrodisc maximum operating pressure 2.1 bar ghp acrodisc maximum operating pressure 2.1 bar Acrodisc PSF Syringe Filters – Medigene Sdn. Bhd. high operating pressures to avoid filter burst AP-4307 2.1 bar at 21-24 °C (70-75 °F) at 2.1 bar

Female luer lock inlet, male slip luer outlet; Membrane Bed Volume. 0.12 mL; Maximum Operating Temperature and Pressure. 2.1 bar (210 kPa, 30 psi) at 60 °C (140 °F) or 5.5 bar (550 kPa, 80 psi) at 21 - 24 °C (70 - 75 °F) Typical Related Products ghp syringe filter 13mm with high quality

Hold-Up Volume <125 µL Housing Material polypropylene Maximum Operating Pressure (bar) 4.1 bar Maximum Operating Temperature (Metric) 82 °C Quantity 50 pkg Typical Flow Rate 144 mL/min at 2.1 bar (210 kPa, 30 psi) Overview Description Type Use Reviews Documents Datasheets Download: English Description

AP-4307 2.1 bar at 21-24 °C (70-75 °F) at 2.1 bar GH Series High Pressure Compressed Air Filter (for pressures Maximum Flow Rate: 365 to 4261 (@350 barg) m3/hour, 214 @ 5076 psig to 2507 @ 5076 psig CFM. Maximum Operating Pressure: 350 barg, 5076 psig. Maximum Operating Temperature: 176 or 104 for filters with activated carbon elements °F.

Capsules were subjected to liquid (isopropanol) pressure testing at a set upstream pressure of 2.1 bar g (30 psig) and observed for leakage. Six hundred ( 600) test units from three (3) production lots with two h undred (200) test unit s from each lot (200 test

ghp filters maximum operating pressure 2.1 bar Iso9001 ghp syringe filter maximum operating pressure 2.1 bar Pall's GHP media is a “universal” membrane that can be Acrodisc syringe filters with Supor® membrane, sterile 2.1 bar (210 kPa, 30 psi) at 60 °C.

Maximum Operating Pressure: 2.1 bar Maximum Operating Temperature: 55°C Pall® Laboratory products are designed for laboratory applications only. This product is not approved for use in medical, clinical, surgical or other patient applications. If you require further assistance in product selection for your chosen application, please contact Pall®.

Hold-Up Volume <125 µL Housing Material polypropylene Maximum Operating Pressure (bar) 2.1 bar Maximum Operating Temperature (Metric) 100 °C Quantity 50 pkg Typical Flow Rate 245 mL/min at 1.0 bar (100 kPa, 15 psi) Overview Description Specifications Applications Type Use Reviews Documents Datasheets Download: English Description

Maximum Operating Temperature. 60 °C (140 °F) at 2.1 bar (210 kPa, 30 psi) Maximum Operating Pressure. Continuous: 4.1 bar (410 kPa, 60 psi) at ambient temperature; Recommended Integrity Test Minimum Bubble Point – Water. 0.2 μm: 3.5 bar (350 kPa, 51 psi) 0.45 μm: 1.7 bar (170 kPa, 24 psi) 60% IPA/40% H2O (v:v) 0.1 μm: 2.4 bar (240 kPa

micropore GH Polypro membrane maximum operating pressure 2.1 bar Acrodisc® 0.2 μm 25 mm Vent Filter Capsules no leakage was observed the pressure was slowly ramped up to 3.4 barg ( 50 psig). No leakage or water breakthrough was observed up to a test pressure of Get Price Certified GH Polypro membrane maximum operating pressure 2.1 bar

Hold-up Maximum Maximum Typical Part Pore Volume Operating Operating Water Number Description Size (w/air purge) Temperature Pressure Flow Rate AP-4305 GxF/GHP 0.2 µm < 200 µL 55 °C (131 °F) at 4.1 bar (410 kPa, 60 psi) 175 mL/min AP-4307 2.1 bar at 21-24 °C (70-75 °F) at 2.1 bar AP-4306 (210 kPa, 30 psi) (210 kPa, 30 psi)

13mm Acrodisc syringe filter with minispike configuration offers low hold up and easy filtration into autosampler vials Acrodisc® Premium Syringe Filters The Acrodisc Premium Syringe Filters are ideal for automated sampling or sample clarification with a larger EFA than typical 25mm devices. They offer two powerful features in one premium filter