“Pall Laboratory products are designed for laboratory applications only. This product is not approved for use in medical, clinical, surgical or other patient applications. If you require further assistance in product selection for your chosen application, please contact Labcustomersupport@pall.com or call 1-800-521-1520."

This syringe filter is made with GHP (hydrophilic polypropylene) membrane for low protein binding and features a polypropylene housing with female Luer-lock inlet and standard male slip Luer outlet connections. The membrane is HPLC certified for low levels of UV-absorbing extractables. Membrane: GHP Membrane. Pore Size: 0.45 µm. Typical hold-up volume: \\<100µL. Pall Life Sciences #: 4560.

Female luer lock inlet, male slip luer outlet Typical Hold-Up Volume (with air purge) < 125 µL Maximum Operating Temperature 82 °C (180 °F) at 2.1 bar (210 kPa, 30 psi) Maximum Operating Pressure 4.1 bar (410 kPa, 60 psi) at 21 - 24 ºC (70 - 75 ºF) 2.1 bar (210 kPa, 30 psi) at 82 ºC (180 ºF) Typical Water Flow Rate

Ideal for filter sterilizing biological fluids, serum, tissue culture media, and media additives. Low hold-up volume minimizes sample loss. HT Tuffryn (polysulfone) membrane is extremely low protein-binding. Maximum operating temperature: 55°C (131°F). Fluid retention is less than 40µL with air purge. Male luer slip and female Luer-lock

Apr 04, 2022 · A Luer lock is a screw connection on a syringe that creates a leak-free seal. Care providers can connect needles, tubing, and other equipment to the lock to perform various activities involved in patient care. This fitting is standardized, with all medical supply companies producing designs to the same specification.

Polypropylene housing. The 13mm fiklter has a female Luer lock inlet and a minispike outlet while the 25mm filter has a female Luer lock inlet and a male slip Luer outlet. The GHP Acrodisc® GF syringe filter version includes a glass fiber prefilter layer for hard-to-filter samples. Other products by Pall Gelman

17 µm nominal. Diameter (Metric) 25 mm. Effective Filtration Area (Metric) 2.8 cm². Housing Material. Modified acrylic. Maximum Operating Temperature (Metric) 55 °C.

[4554] Acrodisc Syringe Filter with GHP Membrane 13mm 0.2 um . The "Universal" Membrane Filter for All of Your Analytical Filtration Requirements 25 mm PSF: Female luer lok inlet, male slip luer outlet. polypropylene housing ghp membrane lower hold-up volume

Maximum Operating Temperature 0.8 µm: 55 °C (131 °F) at 2.1 bar (210 kPa, 30 psi) 10 µm: 82 ºC (180 ºF) at 2.1 bar (210 kPa, 30 psi) Maximum Operating Pressure 4 and 13 mm: 5.2 bar (520 kPa, 75 psi) 25 mm PSF: 4.1 bar (410 kPa, 60 psi) at 21 - 24 ºC (70 - 75 ºF) Typical Water Flow Rate mL/min at 3.1 bar (310 kPa, 45 psi) 4 mm, 0.45 µm: 3

Female Luer Lock (FLL) Female Luer Slip (FLS) Male Luer Lock (MLL) Male Luer Slip (MLS) Male Luer Funnel (MLF) Hose Barb (HB) Materials of Construction Filter Media: Supor (polyethersulfone), Versapor® (acrylic copolymer), or polyester screen Housing: Modified acrylic. Maximum Operating Pressure 5.2 bar (75 psi) Maximum Operating Temperature

Female threaded luer inlet, male slip luer outlet AU T OM I N CERTIFIED ® AND Typical Hold-Up Maximum Maximum Typical Part Pore Volume Operating Operating Water Number Description Size (w/air purge) Temperature Pressure Flow Rate AP-4305 GxF/GHP 0.2 µm < 200 µL 55 °C (131 °F) at 2.1 bar 4.1 bar (410 kPa, 60 psi) 175 mL/min at 2.1 bar

28139-550CS 894.3 USD. 28139-550 28139-548 28143-264. Acrodisc® Syringe Filters with GHP Membrane, Pall Laboratory. Filters Syringe Filters. Pall GHP Polypropylene membrane will be discontinued effective October 31st, 2019. This discontinuation affects devices including syringe filters, filter plates, centrifugal devices and membrane filter discs.

13mm is Female Luer-Lok inlet with minispike outlet. 25mm is Female Luer-Lok inlet with male slip luer outlet: Typical Hold-up Volume (with air purge) 13mm is <14µL 25mm is <100µL 25mm GF is <125µL: Maximum Operating Temperature: 55°C (131°F) Maximum Operating Pressure: 0.2 and 0.45µm is 6.9 bar (100psi) GF/0.45µm is 6.3 bar (90 psi)

Connection Luer Lock Filter Area 22.8 cm2 (0.43 in. ) Wetting / Installation Test Refer to Section 4: Pre-Challenge Installation Test Pressure Rating Maximum operating pressure 3.1 bar.g (45.0 psi.g) at 40 °C for 6 h Maximum differential pressure 3.1 bar.d (45.0 psi.d) at 25 °C for 12 h