Higher operating pressure With a maximum housing pressure of 150 psig (10 bar), solutions can be filtered faster. Low extractables, low binding A variety of membranes and housings ensure chemical compatibility with a range of samples and solvents. BENCh-SCALE FILTERS

Maximum Operating Temperature 55 °C (131 °F) Minimum Bubble Point - Water 0.2 µm: 2.9 bar (290 kPa, 42 psi) 0.45 µm: 1.38 bar (138 kPa, 20 psi) Maximum versatility. Filters aqueous solutions or aggressive chemicals. Low protein binding membrane gives high recovery of critical proteinaceous samples. HPLC certified. Provides assurance that the filter will not add artifacts to your analysis.

membrane for maximum chemical compatibility, fast flow rates, low protein binding, and low AP-4307 2.1 bar at 21-24 °C (70-75 °F) at 2.1 bar ...

• Modified PVDF membrane for inherent water wettability • Extremely low protein and preservative binding for maximum product recovery • Extremely low extractables • Highest flow rate of any PVDF membrane filter Typical Applications SteriLUX® has been optimized for the sterile filtration of critical fluids used in

Maximum Operating Conditions Recommended Feed Flow Rate 4–8 L/m2/min Inlet Pressure 100 psi Forward Transmembrane Pressure 80 psi (5.5 bar) at 4–40°C, 200 hours continuous 40 psi (2.7 bar) at 4–50°C, 50 hours continuous Reverse Transmembrane Pressure 30 psi (2.1 bar) at 25°C, 3 min intervals, 10 cycles

Pall 4558 Acrodisc Syringe Filters with GHP Membrane, Pore Size 0.45 µm, Diameter 25 mm, Pack of 1000: Industrial & Scientific. Automation Certified to ensure smooth operation and worry-free performance 24 hours a day in automated workstations.

Maximum Operating Pressure 5.4 bar (540 kPa, 80 psi) at ambient temperature Typical Water Flow Rate mL/min at 2.1 bar (210 kPa, 30 psi) PN 4905: 130 PN 4906: 78 PN 4907: 130 PN 4908: 77 Recommended Integrity Test Minimum Bubble Point - Water PN 4905: 3.5 bar (350 kPa, 51 psi) PN 4906, 4908, and 4907: 3.2 bar (320 kPa, 46 psi)

Free sample GH Polypro membrane maximum operating pressure 2.1 bar Acrodisc PSF Syringe Filters – Medigene Sdn. Bhd. • Available with GHP hydrophilic polypropylene membrane for maximum chemical compatibility, AP-4219 2.1 bar at 21-24 °C (70-75 °F) (100 kPa,

Fluorodyne EX grade EDF filters are 0.2 micron rated high capacity, low protein binding sterilizing grade filters. Incorporating a built-in prefiltration layer and validated to retain B. diminuta at a challenge level of 10 7 cfu/ cm 2 of membrane, Fluorodyne EX grade EDF filters are ideal for the sterile filtration of cell harvest material and challenging intermediate and final bulk biological

low protein binding membrane ghp syringe filter maximum operating pressure 2.1 bar Supor® EKV Membrane Filters – Membrane Filters – Pall Maximum Operating Temperature * 60 ºC (140 ºF) at 2.1 bar (210 kPa, 30 psi) Maximum Operating Pressure* 5.4 bar (540 kPa, 80 psi) a

Catalogue Number. HVLP04700. Trade Name. Durapore ®. Description. Durapore® Membrane Filter, 0.45 µm. Background Information. Durapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore® membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.

PES (Polyethersulfone) membrane is hydrophilic and constructed from Polyethersulfone polymer membrane. It is designed to remove particulates during general filtration, and its low protein and drug binding characteristics make it ideally suited for life science application. PES Memmbrane Filter.pdf

97035-164 4902 Acrodisc Syringe Filter with Supor EKV 50/pkg membrane, 0.2 µm, 25 mm 97035-166 12246 AcroPak 20 Filter with Supor EKV 3/pkg membrane, 0.2 µm, non-sterile 97035-168 12247 AcroPak 20 Filter with Supor EKV 3/pkg membrane, 0.2 µm, sterilized 97035-170 12094 AcroPak 200 Capsule with Supor EKV 3/pkg membrane, 0.2 µm, tapered hose barb

color-coded for a wide variety of membranes, ranging from 1 kD to 0.45 µm. • Maximize sample recovery– obtain high flow rates and low non-specific protein and nucleic acid binding with Omega™ PES membrane. • Minimize binding– low binding Bio-Inert® and GHP membranes allow the greatest recovery of samples requiring microfiltration.