A flat PTFE membrane 0.02 m 2 with pore size 0.1µm, porosity 55%, thickness 60 µm, was tested for the removal of MIBK from aqueous solution, at feed flow 69.44 mL/sec, vacuum pressure (10.67, 12, 13.33, 14.67) kPa, temperature (34.8, 43.3, 47.8, 52.5, 55 °C), the results showed that the increase in the temperature

Acrodisc Syringe Filters with GHP Membrane (GHP, hydrophilic polypropylene) 55 C (131 F) at 2.1 bar (210 kPa, 30 psi) Maximum Operating Pressure 13 mm: 6.3 ... Pall® Acrodisc® ion chromatography (IC) syringe filters

Dec 07, 2018 · 7th Dec, 2018. When selecting the right membrane for a microfiltration application, one of the most important factors to consider is membrane wettability. While hydrophobic membrane filters are

Maximum operating temperature °C 120 120 95 Area specific proton transport resistance Maximum operating temp and water partial pressures from 40 to 80 kPa Ohm cm 2 0.02 0.02 .025 80°C and water partial pressures from 25 - 45 kPa Ohm cm 2 0.02 0.02 .025 30°C and water partial pressures up to 4 kPa Ohm cm 2 0.03 0.03 NA-20°C Ohm cm 2 0.2 0.2 NA

Aug 03, 2020 · Therefore, the comparison experiments were carried out at around 37 °C of feed temperature. The permeate temperature was around 22 °C. The maximum operating feed and permeate flow rates that could be used with the M3 module without increasing the relative pressure values were 170 L/h and 250 L/h, respectively.

Catalogue Number. HVLP04700. Trade Name. Durapore ®. Description. Durapore® Membrane Filter, 0.45 µm. Background Information. Durapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore® membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.

Maximum Operating Pressure 58 psig @ 77°F (4 bar @ 25°C) Maximum DiFerential Pressure 28 psid @ 77°F (1.9 bar @ 25°C) Maximum Operating Temperature 104°F (40°C) Absolute Removal Ratings (nm) 5, 10, 20, 50, and 100 5, 10 10, 40 Filter Cartridge Integrity All Filters are Tested prior to release

Apr 20, 2020 · Therefore, the D or is just a function of membrane temperature and its values were listed in Table 2. Within the normal operating temperature of 50–80 °C, the Knudsen diffusivity (D kn) for different membrane temperatures and mean pore diameters were also listed in Table 2.

Acrodisc PSF Syringe Filters - Medigene Sdn. Bhd.high operating pressures to avoid filter burst membrane for maximum chemical compatibility, AP-4307 2.1 bar at 21-24 °C (70-7

PALL AP-4560 Acrodisc PSF Syringe Filter with GHP Membrane, 0.45 µm Pore Size, 25 mm Diameter, 50/Package, 200/Case 55°C Maximum Operating Temperature At 2.1 ...

Maximum Operating Temperature 130 °C (266 °F) at 1.0 bar (100 kPa, 15 psi) Maximum Operating Pressure 4.1 bar (410 kPa, 60 psi) at ambient temperature Dimensions Overall Length: 8.2 cm (3.2 in.) Diameter: 7.3 cm (2.9 in.) Inlet/Outlet Connections Stepped hose barbs, 6.4-12.7 mm (1/4-1/2 in.) diameter. Connections have internal taper design to

In the case of a cell temperature of 40 • C and the hydrogen humidified at 55 • C, the hydrogen is rela- tively over-humidified before being fed to the anode side, due to the elevated

AseptiVent TF Hydrophobic PTFE Membrane Capsule Filters Catalog No. :DTLX5701AAXX101 Type :DTL Pore Size :0.2 µm Lot Number :DT7577G Sl.No. 004 SPECIFICATION Length 8” Filter Media Hydrophobic PTFE Membrane Drainage Layers Polypropylene Differential Pressure < 4Kg/cm ² at 30 °C Housing Polypropylene Maximum Operating Temperature 80 °C

Sample Volume: 13mm is . 10mL 25mm is 100mL 25mm Premium is 150mL: Inlet/Outlet Connections: 13mm is Female Luer-Lok inlet with minispike outlet. 25mm is Female Luer-Lok inlet with male slip luer outlet: Typical Hold-up Volume (with air purge) 13mm is 14µL 25mm is 100µL 25mm GF is 125µL: Maximum Operating Temperature: 55°C (131°F

4219. Acrodisc Syringe Filter 25mm 0.45um. Hydrophobic PTFE membrane for exceptional chemical and temperature compatibility. HPLC certified for low level UV-absorbing extractables. Polypropylene housing. Female Luer-Lok inlet standard male slip Luer outlet. \<100uL hold-up volume. 50/pk. 200/cs.