PTFE Filter 100/pkg 47 mm 0.2 µm WAT200535 GHP 100/pkg 47 mm 0.2 mm 186003524 Supor (PES) Filter 100/pkg 47 mm 0.2 µm WAT200539 Thick Glass Filter 100/pkg 10 mm 1.0 µm WAT200541 A/E Glass Filter 100/pkg 10 mm 1.0 µm WAT200542 Description Part No. Solvent Filtration Apparatus 110 V, 60 Hz WAT085113 Solvent Filtration Apparatus 220 V, 50 Hz

Filter Media: Omega membrane (low protein-binding, modified polyethersulfone on polyethylene substrate) Filtrate Receiver: Polypropylene Nanosep MF Devices Filter Media: Bio-Inert (modified nylon) or GH Polypro (GHP, hydrophilic polypropylene) membrane Filtrate Receiver: Polypropylene Effective Filtration Area 0.28 cm2 Centrifuge

Note: Extractable levels may be reduced by flushing the filter prior to use. Ordering Information Pkg Part Number Description Pk/Case 4554 GHP Acrodisc Minispike, 0.2 µm, 13 mm 100/300 4556 GHP Acrodisc Minispike, 0.45 µm, 13 mm 100/300 4564 GHP Acrodisc, 0.2 µm, 25 mm 50/200 4560 GHP Acrodisc, 0.45 µm, 25 mm 50/200

hydrophobic pall ghp effective filtration area 3.9 cm2 Mini KleenpakTM Capsules with Emflon® PFR Membrane – G.Eitan Efficient sterilizing filtration of air Pall® Mini Kleenpak capsules with Emflon capsule filter (280 cm2 [0.3 ft2] filter

Multimedia and RW06, 0.5 µm Filter Membrane plus Cartridges Media Over Durapore MEC 10”-30” Hydrophilic 0.22 µm on a polyester web Membrane Durapore CVSS--TP3, Milligard Rigid Polypropylene Modified Spun-Bonded Polypropylene Silicone 0.22 µm RW06, 0.5 µm PVDF Multimedia and RW03, 0.2 µm Filter Membrane plus Cartridges Media Over

PALL-catalog.pdf - Swiss Labs GHP (Hydrophilic Polypropylene) Membrane Polypropylene. Effective Filtration Area. 0.3 cm2. Dimensions 25 mm PSF: 3.9 cm2. 32 mm: 5.8 cm2.

Effective filtration area: 7.2 cm²: Dimensions: Length: 12.0 cm (4.7 in.) Diameter: 50 mm (1.9 in.) Operating temperature range: 0 – 40 °C (32 – 104 °F) Capacities: Maximum Sample Volume: 20 mL Final Concentrate Volume: As low as 450 μL, depending on rotor used Filtrate Receiver Volume: 22 mL Hold-up Volume: 80 μL (membrane and paddle Get Price

Once wetted, hydrophilic filters do not allow the free passage of gases until the applied pressure exceeds the bubble point and the liquid is expelled from the pores of the membrane. Hydrophobic filters will not wet in water but will wet in low surface tension liquids, for example, organic solvents such as alcohols. Once a hydrophobic filter

Polypropylene (PP) membranes having a hydrophilic surface have been prepared by extracting a fugitive hydrophilic pore-forming agent from a gelled film prepared by evaporating the solvent from a homogeneous solution of isotactic polypropylene, functionalized polypropylene an the fugitive agent in a solvent, such as xylene.

Effective Membrane Filtration Area per Well: 0.94 cm2. Filter Plate Diameter: 15.24 cm GHP (hydrophilic polypropylene) membrane for low protein binding. Centrifugal Devices for Ultrafiltration & Microfiltration (GHP, hydrophilic polypropylene) membrane. Filtrate Receiver: Polypropylene. Effective Filtration Area. 0.28 cm2. Centrifuge.

Pall GHP Polypropylene membrane will be discontinued effective October 31st, 2019. This discontinuation affects devices including Filter Plates, Syringe Filters, Centrifugal Devices and Membrane Filter Discs. Essential for biomolecule purifications and separations filter plates are offered in different filtration media membrane to accommodate any array applications. With individual membranes

Acrodisc One Syringe Filters with wwPTFE Membrane and Syringe Filters with Hydrophilic Polypropylene Membrane Extractables In 1994, GHP (hydrophilic polypropylene) was launched as the universal membrane for analytical chemistry applications. Since that time, the hydrophilic polypropylene membrane has been the membrane of choice for

Transducer Protector, Sterile, Diameter: 28.6 mm, Filtration Area: 3.9 sq. cm, Filter Pore Size: 0.22 micrometer, Max. Pressure: 1.7 bar, Wettability: Hydrophobic, Fitting Inlet: Female Luer slip, Fitting Outlet: Male Luer slip, 50/PK 23 GENESEE SCIENTIFIC CORPORATION NITEX NYLON MESH 30 MICRON NC9084441 NITEX NYLON MESH 30 MICRON 24

mdi Membrane Technologies. mdi Hydrophilic Polypropylene membrane Syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low.

Hydrophilic Membranes for General Aqueous Samples Widely used in dissolution testing, choose from a variety of pore sizes and membrane types for prefiltration and clarification including Supor, HT Tuffryn and Versapor membranes. Recommended Suitable Not Recommended Aggressive Organic Proteinaceous General Aqueous