Hydrophilic polypropylene; Pore Size. 0.2 and 0.45 µm; Typical Thickness. 0.2 µm: 101 µm (4.0 mils) 0.45 µm: 114 µm (4.5 mils) Typical Water Flow RatemL/min/cm 2 at 0.7 bar (70 kPa, 10 psi) 0.2 µm: 20; 0.45 µm: 31; Maximum Operating Temperature. 55 °C (131 °F) Minimum Bubble Point - IPA. 0.2 µm: 1 bar (100 kPa, 14.5 psi) 0.45 µm: 0

Operating Conditions Maximum Operating Pressure: Liquid: 5.5 bar (80 psi) at 22 °C Gas: 4.1 bar (59.5 psi) at 22 °C Minimum Burst Pressure: 8.3 bar (120 psi) at 22 °C Maximum Forward Differential Pressure: 5 bar (72.5 psi) at 22 °C Maximum Reverse Differential Pressure: s 2.1 bar (30.5 psi) at 22 °C Maximum Operating Temperature:

GH Polypro (GHP): Hydrophilic polypropylene Nylon: Hydrophilic nylon Hold-up Maximum Maximum Typical Part Pore Volume Operating Operating Water ... AP-4307 2.1 ...

Filter Membrane Hydrophilic modified PVDF Support/Drainage Polypropylene Capsule Shell Polypropylene Filling Bell Polycarbonate Sealing Technology Thermal bonding without adhesives Operating Parameters(1) Maximum Temperature 40 °C Maximum Operating Pressure 4.1 bar (60 psi) at 40 °C Maximum Differential Pressure 4.1 bar (60 psi) at 40 °C

GH Polypro (GHP) Membrane Disc Filters All purpose, universal membrane with maximum chemical compatibility for both aqueous solutions and aggressive solvents Specifications Filter Media Hydrophilic polypropylene Pore Size 0.2 and 0.45 µm Typical Thickness 0.2 µm: 101 µm (4.0 mils) 0.45 µm: 114 µm (4.5 mils) Typical Water Flow Rate mL/min

Maximum Differential Pressure Forward: 75 psid (5.1 bar) @ 75°F (24°C) 40 psid (2.8 bar) @ 180°F (82°C) Reverse: 50 psid (3.4 bar) @ 75°F (24°C) Maximum Operating Temperature 180°F (82°C) Continuous Duty Polypropylene 275°F (135°C) Continuous Duty Polyester Toxicity Cartridge materials meet CFR 21 for food and beverage contact

GH Polypro (GHP) Membrane Disc Filters Product image is a representative example for illustration purposes actual image may vary. Membrane with Chemical Compatibility for Aqueous Solutions and Aggressive Solvents

Filter Media: GHP (hydrophilic polypropylene), Nylon at 2.1 bar 4.1 bar (410 kPa, 60 psi) 175 mL/min at 2.1 bar Hold-Up Maximum Maximum Typical Part Pore ... Syringe Filters - Ciro Manufacturing Corporation

The GHP hydrophilic polypropylene (GH Polypro) membrane is ideal for maximum chemical compatibility, fast flow rates, low protein binding, and low levels of UV-absorbing extractables. The glass fiber membrane allows for quick and easy filtration for difficult-to-filter aqueous solutions.

micropore GH Polypro membrane maximum operating pressure 2.1 bar Product Introduction Acrodisc® 0.2 μm 25 mm Vent Filter Capsules no leakage was observed the pressure was slowly ramped up to 3.4 barg ( 50 psig). No leakage or water breakthrough was observed up to a test pressure of 3.4 barg (50 psig).

Operating Conditions: Maximum Operating Pressure: Liquid: 5.5 bar (80 psi) at 22 °C Gas: 4.1 bar (59.5 psi) at 22 °C Maximum Forward Differential Pressure: 4.2 bar (61 psi) at 22 °C Maximum Reverse Differential Pressure: 2.1 bar (30.5 psi) at 22 °C Minimum Burst Pressure: 8.3 bar (120 psi) at 22 °C Maximum Operating Temperature: 60 °C

Maximum Operating Temperature* – 60 ºC (140 ºF) at 2.1 bar 60 ºC (140 ºF) at 1.0 bar (210 kPa, 30 psi) (100 kPa, 15 psi) Maximum Operating Pressure* – 5.4 bar (540 kPa, 80 psi) 4.1 bar (410 kPa, 60 psi)

Gas: 4.1 bar (60psi) at 77°F/25°C Minimum Burst Pressure: 8.3 bar (120psi) at 77°F/25°C Maximum Forward Differential Pressure: 4.21 bar (60psi) at 68°F/20°C Maximum Reverse Differential Pressure: 2.1 bar (30psi) at 68°F/20°C Maximum Operating Temperature: 140°F/60°C Features Benefits Naturally Hydrophilic Nylon Membrane (Absolute Rated)

Minimum Burst Pressure: 8.3 bar (120psi) at 77°F/25°C Maximum Forward Differential Pressure: 4.21 bar (60psi) at 68°F/20°C Maximum Reverse Differential Pressure: 2.1 bar (30psi) at 68°F/20°C Maximum Operating Temperature: PP & Gamma PP: 176°F/80°C D HDPE: 140°F/60°C 0 5 10 15 0 0.2 0.4 0.6 0.8 1 0 0.5 1 1.5 2 2.5 3 0 2 4 6 8 10

Maximum Differential Pressure Forward: 75 psid (5.1 bar) @ 75°F (24°C) 40 psid (2.8 bar) @ 180°F (82°C) Reverse: 50 psid (3.4 bar) @ 75°F (24°C) Maximum Operating Temperature 180°F (82°C) Continuous Duty Polypropylene 275°F (135°C) Continuous Duty Polyester Toxicity Cartridge materials meet CFR 21 for food and beverage contact