Overview of Non-Sterile Millex® Syringe Filters with PES Membrane: • Non-sterile Millex® syringe filters with Millipore Express® PLUS polyethersulfone (PES) membrane provide fast filtration of aqueous and mild organic solutions. • Available in 0.22 µm and 0.45 µm pore sizes and two diameters to suit your application needs.
MM syringe filters are designed and manufactured to minimize column clogging and maximizing See full list on emdmillipore.com
0.45 μm syringe filters were determined by passing through each syringe filter a 3 mL volume of a 0.05% suspension (w/w) in 0.1% Triton™ X-100 (Sigma) of polystyrene latex beads (Sigma) with average diameters of 0.46 μm. For each filter, a total of five test pieces were evaluated. The bead concentrations of the challenge
Syringe filters are single use, self contained, filtration devices that are typically used to remove contaminating particulate from liquids or gasses. When selecting the correct syringe filter for an application there are a number of factors to consider, these include: Filter and housing materials. Pore size. Effective filtration area.
$122 Millipore SLHV025NS Millex Syringe Filters 25mm 0.45um SLHV-025- Business & Industrial Healthcare, Lab & Dental Medical, Lab & Dental Supplies
Millex-GN syringe filter units, disposable with Luer fitting pore size 0.45 μm, filter diam. 25 mm, non-sterile; find Millipore-Z364991 MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich
Millipore. Millex-GP Syringe Filter Unit, 0.22 µm, polyethersulfone, 33 mm, gamma sterilized. A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic Polyethersulfone (PES) membrane. Comes in a pack of 50. MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents.
Plasma membrane vesicles were collected and cell debris was removed with 0.22 µm syringe filter unit (Millex-GV Syringe Filter Unit, 0.22 µm, PVDF, 33 mm, Merck). Vesicles were stored in aliquots at 4 °C until use.
A syringe filter (sometimes called a wheel filter if it has a wheel-like shape) is a single-use filter cartridge. It is attached to the end of a syringe for use. Syringe filters may have Luer lock fittings, though not universally so. The use of a needle is optional; where desired it may be fitted to the end of the syringe filter.
Puradisc 25 is a 25 mm diameter syringe filter for sample volume throughput up to 100 mL . Low hold volumes of <100 µL allow for ma x imum sample recovery. Applications include HPLC aqueous sample preparation, biological sample preparation, buffer solutions, salt solutions, tissue culture media, irrigation solutions, ophthalmic solutions and
• Nylon filters provide broad chemical compatibility for use with aqueous and organic solutions. • ®Millipore Express PLUS (PES) filters have fastest flow rates and higher throughput. • MF-Millipore™ mixed cellulose ester (MCE) membrane is a widely used, general purpose filter. Millex Syringe Filters Filter with confidence
Millipore. Millex-GP Syringe Filter Unit, 0.22 µm, polyethersulfone, 33 mm, gamma sterilized. A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic Polyethersulfone (PES) membrane. Comes in a pack of 50. MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents.
Millex® Syringe filters set the standard for reliable small volume filtration (1 mL to 200 mL). Available in 4, 13, 25, 33, and 50 mm diameters; Minimal hold-up volume for less sample loss o f small volumes and are ideal for solutions such as antibiotics and tissue culture additives. Their unsurpassed quality and consistency of results has led to the development of many sample preparation methods that specify Millex® filters.
Millipore SLFHT13NL Nylon Millex-FH Syringe Filter with Tube Outlet, Non-Sterile, 0.45m Pore Size, 50 mL/min Methanol Flow Rate, 13mm Diameter (Pack of 100) These filter units are non-sterile, single use, and disposable.
Millipore syringe filters are available in a variety of membranes and housing styles to meet your application needs. Ideal for sterile, ion chromatography, and HPLC sample preparation. All syringe filters have a female luer-lock inlet and a male luer slip connector. 28 variations of this product are available.
Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 8mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1pack
Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 9mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1pack
Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 10mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1pack
Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 11mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1pack