The 0,01 µm Coalescing Filter is ideal where critically clean air is needed and pressure drop is not a concern. It is a polisher filter to clean up any remains of particles or oil that are left over from the compressor room filtration. It is mainly a point-of-use filter that is targeted specifically for critical processes.

Rated at a maximum pressure of 10 bar at 360 l/min, Maxiflow filters cover a wide range of mobile and industrial applications. Maxiflow filters are ideally suited to full flow and bypass circuit installations where the need for high quality filter media is recommended for effective protection of system components, improving system productivity

Pall Mini Kleenpak capsules with Emflon®PFR media are designed for air filtration and vent applications where the use of a small-sized and low weight is critical. With a surface area of 280 cm², each hydrophobic Mini Kleenpak capsule filter contains a proprietary high-performance PTFE membrane. 0.2 PTFE mini-filter capsule comes with an inherently hydrophobic and chemically resistant membrane.

5” 223 - - 120 173 1.5 2.1 10” 349 - - 120 300 2.2 2.7 20” 603 - - 120 554 3.7 3.3 30” 857 - - 120 808 5.1 4.1 51 Series Technical Data Maximum Operating Conditions Pressure Range: Liquid: FV / 10 bar g Gas Group 2: FV / 10 bar g Temperature Range: -10ºC / 150ºC Materials of Construction Body and Closure: 316L St.Steel Alloy 22

Maximum Operating Temperature 82 °C (180 °F) at 2.1 bar (210 kPa, 30 psi) Maximum Operating Pressure 4.1 bar (410 kPa, 60 psi) at 21 - 24 ºC (70 - 75 ºF) 2.1 bar (210 kPa, 30 psi) at 82 ºC (180 ºF) Typical Water Flow Rate 795 mL/min at 1.0 bar (100 kPa, 15 psi) Related Products 47 mm Filter Funnels, Glass HPLC Mobile Phase Filtration

Parker domnick hunter GH series high pressure filters are designed to be ideal for high pressure applications up to 100 bar g. The innovative construction features of the filter housing provide a reliable assembly, as well as simple and safe handling for replacing the filter element.

Nov 26, 2015 · Manual Steel Filters flow rates filtration degrees diameters maximum operating pressure up to 300 m3/h 1320 gpm 3500-80 micron 50-200 mm 2” - 8” 10 bar 145 psi • Interchangeable filter elements for a wide range of flow rates, filtration degrees and applications • High quality polyester coating, as well as stainless

• High quality stainless steel design • Extremely low differential pressure • Various connection types • /h up to . From 60 m 19.200 m. 3 /h. MAIN FEATURES & BENEFITS: • Food & Beverage • Engineering • Chemical Industry • Pharmaceutical Industry • Automotive INDUSTRIES: Process Filtration From Pure to Sterile . P -EG

Certified ghp membrane maximum operating pressure 2.1 bar GH Polypro (GHP) Membrane Disc Filters – Separations Maximum Operating Temperature 55 °C (131 °F) Minimum Bubble Point – Water 0.2 µm: 2.9 bar (290 kPa, 42 psi) 0.45 µm: 1.38 bar (138 k

• High-quality snap-action switch • Factory preset • Available in a wide range of configurations • Economical • Pneumatic and hydraulic applications • NEMA 4, 13 Operating Specifications Set Point Range 2 — 120 PSI (.14 — 8.3 Bar) Set Point Tolerance ±1 PSI or 5% (.07 Bar) Maximum Operating Pressure 250 PSI (17 Bar)

High Pressure Filters Max 1000 l/min - 414 bar When it comes to high flow capacity for high pressure systems A high flow rate filter solution The 100P Series design means on element change only the bowl end-cap has to be removed. Microglass lll glassfibre media is standard. Maximum pressure 414 bar. Maximum flow 1000 l/min. An ideal solution

The OIL-Xplus range of filters offer the lowest operating cost available by virtue of their low operating pressure drop. In some cases, 50% more energy efficient than typical filters. NORMAL OPERATION OVER 1 YEAR PRESSURE DIFFERENTIAL psi 10 PRESSURE DIFFERENTIAL bar 5 4 3 2 1 0 0.7 0.5 0.35 0.3 0.1 Filter pressure drop comparison Typical

Operating pressure: Maximum 0.63 MPa (6.3 bar / 91.4 psi) Minimum 0.19 MPa (1.9 bar / 27.6 psi) The operating pressure in your home should be tested over a 24 hour period to attain the maximum pressure. If it is above 0.63 MPa (6.3 bar / 91.4 psi), then a pressure regulator is necessary, and will be required.

Referred to an absolute pressure of 1 bar and temperature of 20°C According to ISO 8573-1:2010 in a typical installation According to ISO 12500-1 at oil concentration upstream of the filter of 10 mg/m 3 (Grade G = 40 mg/m )

The maximum recommended operating temperature for this range of filters is 80°C. The maximum allowable differential pressure ( P) in either a forward or reverse direction is dependent upon the operating temperature as illustrated in the following table: Temperature C Maximum Differential Pressure, Bar (forward flow) Maximum Differential