For optimal results Minisart® filters made of MBS housing provide a choice of membranes with pore sizes ranging from 0.1 μm to 5 μm for high flow rates and Get Price Membrane-Filters.pdf - Obrnuta faza
Pall GHP Polypropylene membrane will be discontinued effective October 31st, 2019. This discontinuation affects devices including syringe filters, filter plates, centrifugal devices and membrane filter discs. Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either
Typical Water Flow Rate: 144 mL/Min. 3. $736.42. AP-4357. Acrodisc 25mm Premium Syringe Filter Polypropylene housing. 0.45um GHP hydrophilic polypropylene membrane for maximum chemical compatibility fast flow rates low protein binding low levels of UV-absorbing extractables. AutoPack tube format.
Millex Syringe Filters - SOMATCOFaster Flow Rate 33 mm Millex filters have 20% more filter surface than 25 mm filters for significantly higher flow rate and throughput.
Membrane with Chemical Compatibility for Aqueous Solutions and Aggressive Solvents. Maximum versatility. Filters aqueous solutions or aggressive chemicals. Low protein binding membrane gives high recovery of critical proteinaceous samples. HPLC certified. Provides assurance that the filter will not add artifacts to your analysis. Low API
High flow rate. Upstream prefilter. Self-venting via 0.2um PTFE vent. 10/pk. $104.24 Pall Filter 4482 AcroCap Positive Pressure Device Sterile 0.45um pore size. Presterilized disposable. For up to 3L. Use with peristaltic pump or pressure vessel to eliminate
Fluoropore Membrane Filter 3.0 µm pore size, hydrophobic PTFE Fluoropore membranes provide broad chemical compatibility, high flow rates and consistency. (Please note that catalog
General description. These offer high quality filtration for analytical samples. Certified for HPLC to ensure low extractables. Available in a broad range of membranes to meet sample compatibility requirements. The 25 mm Acrodisc is recommended for sample volumes from 5 to 100 mL. The 13 mm size is recommended for samples under 10 mL in volume.
Acrodisc® Syringe Filters with GHP Membrane - HPLC/UHPLC Acrodisc® Syringe Filters with GHP Membrane at 2.1 bar (210 kPa, 30 psi) Maximum Operating Pressure. 13 mm: 6.3 bar (630 kPa, 90 psi) Typical Water Flow Rate ...
Pall GHP Polypropylene membrane will be discontinued effective October 31st, 2019. This discontinuation affects devices including Filter Plates, Syringe Filters, Centrifugal Devices and Membrane Filter Discs. Essential for biomolecule purifications and separations filter plates are offered in different filtration media membrane to accommodate any array applications. With individual membranes
High Flow Membranes - United Filtration Systems Inc. Recommended Flow Rate (LPM) 0.35: 10: Membrane Micron Size: 0.1: 0.8: Membrane Size: MT.61.M1HG: MT.61.M2HG: Membrane Type: Low Flow: High Flow: Material: PTFE: PTFE: Diameter (mm) 61: 61: Thickness (μm) 152: 152: Maximum Temperature (ºF) 300: 300: Recommended Flow Rate (LPM) 2: 15: Membrane Micron Size: 0.1: 0.8: Membrane Size: MT.89.M1G: MT.89.M2G: Membrane Type: Low Flow: High Flow: Material: PTFE: PTFE
Acrodisc 0.2 um syringe filter for laboratory vacuum filter . Acrodisc, Minispike Syringe Filter, GHP, 13 mm, 0.2 µm, Aqueous, 1000/case Aijiren Technology understands that proper filtration of samples and solvents is an important preventative maintenance procedure that laboratories rely on to save time and . GH Polypro (GHP) Membrane Disc Filters - Separations
GHP Acrodisc™ has a hydrophilic polypropylene membrane. Will handle both aqueous as well as aggressive organic solvent-based solutions. Available with glass fiber (GF) prefilter for particle laden samples (EF8436C). Nylon Acrodisc™ has a 25 mm HPLC certified nonpyrogenic nylon membrane for analyzing aqueous samples. Non-autoclavable.
Pall Laboratory. of filter media: hydrophilic nylon membrane for excellent chemical compatibility with esters, bases, and alcohols, without pre-wetting; GHP (hydrophilic polypropylene) membrane for low protein binding; and hydrophilic PVDF (polyvinylidine fluoride) membrane for use in aqueous and non-aggressive,. Compare this item.
High flow rates with minimal aqueous extractables (0.3wt%); Optically clear when wet with water; Unlaminated; Ideal for HPLC and other mixtures of aqueous and Get Price High Flow Membranes - United Filtration Systems
