• High temperature nitrile baseplate gaskets withstand extremely high racing temperatures (up to 300°F). • Zinc chromate-plated baseplate provides low surface friction and is corrosion free. • Spiral-wound center tube provides increased collapse pressure and enhanced flow pattern.

Acrodisc® Syringe Filters with GHP Membrane at 2.1 bar (210 kPa, 30 psi) Maximum Operating Pressure. 13 mm: 6.3 bar (630 kPa, 90 psi) ... Typical Water Flow Rate ...

Maximum Operating Pressure 4.1 bar (410 kPa, 60 psi) at 21 - 24 ºC (70 - 75 ºF) 2.1 bar (210 kPa, 30 psi) at 82 ºC (180 ºF) Typical Water Flow Rate 795 mL/min at 1.0 bar (100 kPa, 15 psi) Related Products 47 mm Filter Funnels, Glass HPLC Mobile Phase Filtration Membranes SolVac® Filter Holder Stainless Steel Forceps Vacuum/Pressure Pumps

typical hold-up maximum maximum typical part pore volume operating operating water number description size (w/air purge) temperature pressure flow rate ap-4792 gxf/pvdf 0.2 µm < 125 µl 82 °c (180 °f) at 2.1 bar 4.1 bar (410 kpa, 60 psi) 95 ml/min at 2.1 bar ap-4793 (210 kpa, 30 psi) at 21-24 °c (70-75 °f) (210 kpa, 30 psi) ap-4794 ap-4309

Maximum Operating Temperature: 55°C (131°F) Maximum Operating Pressure: 0.2 and 0.45µm is 6.9 bar (100psi) GF/0.45µm is 6.3 bar (90 psi) Typical Water Flow Rate (mL/min at 2.1 bar (30psi)) 0.2µm, 25mm is 60 0.45µm, 25mm is 65 0.45µm, 25mm GF is 60: Typical Water Flow Rate (mL/min at 0.7 bar (10psi)) 0.2µm, 13mm is 17 0.45µm, 13mm is 28

Maximum Operating Temperature and Pressure. 2.1 bar (210 kPa, 30 psi) at 60 °C (140 °F) or 5.5 bar (550 kPa, 80 psi) at 21 - 24 °C (70 - 75 °F) Typical Differential Pressure < 0.07 bar (7 kPa, 1 psi) @ 1 mL/min; Mean Flow Rate. 1 - 4 mL/min; flow rate will vary with type of solutions, concentration of proteins, and other components

High Flow Series Maximum Operating Conditions: NMaximum Temperature: 176°F (80°C) @ 30 psid (2.1 bar) NMaximum Differential Pressure: 70 psi (4.8 bar) @ 77°F (25°C) 30 psi (2.1 bar) @ 176°F (80°C) Recommended Operating Conditions: Materials of Construction: NMedia: RCP - Polypropylene RMG - Microfiberglass NSupport/Drainage: Polypropylene

Gas filtration & Purification - Pall Corporation. Operating Conditions. Maximum Operating Pressure: 2200 psig / 152 bar; Maximum operating temperature: 100 °C / 212 °F (INP, SIP, FCP, SF6P) 40 °C / 104 °F (GEH4P, OXP, CLXP, HCLP, HBRP, CDAP) EU Pressure Equipment Directive: Assemblies have been evaluated and are CE marked per the European Union's Pressure Equipment Directive 2014/68/EU.

Recommended Operating Conditions The maximum differential pressure in direction of flow (outside to in) is 3.5 barg (50.76 psig) at 60 °C (140 °F). The maximum recommended continuous inlet air temperature is 60 °C (140 °F). Note: HIGH FLOW TETPOR II cartridges can be used as WFI vents in heated housings if changed on a 4-6 monthly basis.

Home » News » GHP Filter » disc filter ghp syringe filter maximum operating pressure 2.1 bar disc filter ghp syringe filter maximum operating pressure 2.1 bar GL Chromatodisc PF Syringe Filter, Syringe Filter with GL Chromatodisc PF Syringe Filter, syringe filter with prefilter for Hydrophilic Samples GL Chromatodisc 25APF The GL

Maximum operating pressure (bar) 10 16** Ambient temperature range (°C) 2 = 1/4 (Series 651 or 652) ... High flow rates and broad range of Air Preparation ...

Flow Rate 13 Nm 3/hr 17 Nm 3/hr 20 Nm 3/hr 24 Nm 3/hr 9 Nm 3/hr 1.2.8 Maximum Temperature and Pressure Ratings Novasip filters incorporating Pall membrane filter cartridges were found to retain integrity after exposure to the following conditions: Table 4 Maximum Operating Pressure/Temperature Maximum Line Pressure 6.5 bar g (94 psi)

High Flow Rate Capability 176°F (80°C) @ 30 ∆P (2.1 bar) Maximum Differential Pressure: Forward: 70 psi (4.8 bar) @ 77 °F (25 C) ... .2.1 0 LPM PSI GPM BAR ...

† These columns are packed and assembled for high- pressure (up to bar) use. Disassembling the column will degrade column performance. † ZORBAX SB-C18 is compatible with water and all common organic solvents. † Avoid use of columns below pH 0.8 or above pH 8.0. † Maximum operating pressure is bar (17,000 psi). Optimal

Maximum Operating Pressure (bar) 2.1 bar 55°C. Typical Flow Rate. 215 mL/min at 2.1 bar (210 kPa, 30 psi) Nylon syringe filters can be used for both aqueous ... Separation and Purification Sciences Division Hollow fiber