Pore Size Chart for Different types of filtration The following chart shows the different pore sizes and molecules ideal for ultrafiltration, diafiltration, microfiltration, dialysis, and macrofiltration.
Pore Size 0.2 µm µm nominal Alternate for AP-4305 Diameter (Metric) 25 mm Effective Filtration Area (Metric) 3.9 cm² Filter Media wwPTFE Hold-Up Volume <125 µL Housing Material polypropylene Maximum Operating Pressure (bar) 6.2 bar Maximum Operating Temperature (Metric) 55 °C Replacement for AP-4305 Typical Flow Rate
25 mm PSF Acrodisc Syringe Filters. Features a large effective filtration area for increased sample throughput, ideal for sample volumes of ≤ 125 mL. Pall’s proprietary membrane technology and accurate pore size ratings offer superior HPLC column protection, helping extend column life by as much as 52 times. Shop Now 25 mm PSF Syringe Filters.
Pore Size 0.2 µm µm nominal Filter Size 25 mm Diameter (Metric) 25 mm Effective Filtration Area (Metric) 2.8 cm² Filter Media Nylon Hold-Up Volume <125 µL See All Attributes Acrodisc® Syringe Filters with Nylon Membrane - 0.2 µm, 13mm, male slip luer outlet (100/pkg 300/cs) Product ID 4427 Unit of Measure 1/CV Min Order Qty 1 Pore Size
Specialty Products. Whatman Nuclepore Hydrophilic Membrane, 0.2 µm Pore Size, 47 mm Circle, 100 Pack, 10417012. Regular Price $196.70 Price $171.05. Add to Cart. Whatman 6874-1302 GD/X 13 mm Syringe Filter, PTFE filtration medium, 0.2 um (150 pcs) Regular Price $487.28 Price $423.72. Add to Cart.
GH Polypro (GHP) Membrane Disc Filters - Separations All purpose, universal membrane with maximum chemical compatibility for both aqueous solutions and aggressive solvents Specifications Filter Media Hydrophilic polypropylene Pore Size 0.2 and 0.45 µm Typical Thickness 0.2 µm: 101 µm (4.0 mils) 0.45 µm: 114 µm (4.5 mils) Typical Water Flow Rate mL/min/cm 2 at 0.7 bar (70 kPa, 10 psi) 0.2 µm
The 0.5 μm pore size is normally used. Air and gas sterilization make use of the hydrophobic characteristics of PTFE membranes and their ability to stop aqueous aerosols. Usual pore sizes are 0.2 μm and 0.5 μm. Sterile venting of vacuum manifolds, fermentation vessels, and sterile filtrate tanks and containers utilize PTFE 0.2 μm membranes.
ghp syringe filter pore size 0.2um with high quality [[4554] Acrodisc Syringe Filter with GHP Membrane 13mm 0.2 um Filter Media: GH Polypro membrane (GHP, hydrophilic polypropylene) - Housing: Polypropylene - GxF Prefilter: Binder-free borosilicate glass.
Syringe filters with different pore size ratings are suitable for different applications. For example, syringe filters containing 0.45 μm are typically used for HPLC sample preparation and 0.2 μm is used for UHPLC. In life science applications 0.1 and 0.2 µm pore sizes provide sterilization of buffers, culture media, and additives.
Pall Filter Syrng 0.2UM Ghp PK1000 AP-4566 ON SALE . Pall Laboratory Filters, Syringe filters.
The Acrodisc Minispike Syringe Filter, GHP employs cutting-edge separation technology to ensure accurate pore size ratings for improved chromatography as well as instrument and column protection. It also provides consistent analytical results (lot-to-lot) and low extractable components for minimal chromatographic interference.
Hach Company Filter, Membrane, Pore Size 0.2 µm, Diameter 47 mm, 200/pk (Gelman) Manufacturer: Hach Company 2618800 For isolation and enumeration of stressed organisms (Pseudomonas species). High retention and flow rate. Certified for use in membrane filtration analysis. White polyethersulfone media. STerile and individually packaged.
Accurate pore size rating – Acrodisc PSF syringe filters are more retentive than standard 25 mm devices and are available with single-layer membranes or multi-layer glass fiber prefilters. Superior HPLC column protection – Better retention efficiency helps extend column life as much as 46 times.
0.22 μm pore size 85 % porosity Description General description Filter Code: FGLP Filter Type: Screen filter Our Fluoropore® membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support to improve the handling characteristics of the filter for normal applications.
MilliporeSigma™ Omnipore™ Membrane Filters, 0.2 μm Hydrophilic PTFE polymer membrane filter compatible with virtually all solvents, acids, and alkaline solutions. Omnipore™ Membrane Filters are biologically and chemically inert. Manufacturer: MilliporeSigma™ JGWP04700 Catalog No. JGWP04700 $453.50 / Pack of 100 Qty Check Availability Add to cart
