Pall's GHP media is a “universal” membrane that can be Acrodisc syringe filters with Supor® membrane, sterile 2.1 bar (210 kPa, 30 psi) at 60 °C.
high operating pressures to avoid filter burst membrane for maximum chemical compatibility, AP-4307 2.1 bar at 21-24 °C (70-75 °F) at 2.1 bar ... GH Series High Pressure Compressed Air Filter (for pressures
Maximum Operating Temperatures and Pressures 80 psid @ 32°F to 100°F (∆p 5,5 bar @ 0°C to 38°C) 60 psid @ 150°F (∆p 4,1 bar @ 66°C) 30 psid @ 180°F (∆p 2,1 bar @ 82°C) Capsules - CS/CL & CF Models Maximum Operating Pressure, Liquids Maximum Operating Pressure, Gas 75 psig @ 32°F to 100°F 50 psig @ 32°F to 100°F
Pall GHP Polypropylene membrane will be discontinued effective October 31st, 2019. This discontinuation affects devices including syringe filters, filter plates, centrifugal devices and membrane filter discs. Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either
mL/min/cm 2 at 0.7 bar (70 kPa, 10 psi) 0.2 µm: 20 0.45 µm: 31 Maximum Operating Temperature 55 °C (131 °F) Minimum Bubble Point - Water 0.2 µm: 2.9 bar (290 kPa, 42 psi) 0.45 µm: 1.38 bar (138 kPa, 20 psi) Maximum versatility. Filters aqueous solutions or aggressive chemicals. Low protein binding membrane gives high recovery of critical
Acrodisc® Syringe Filter with wwPTFE membrane & wwPTFE Membrane Disc Filters, Pall. Avoid the expense and inconvenience of keeping a variety of filters on hand. Versatile filter for aqueous and aggressive organic solvent-based solutions. AutoPack™ packaging is easy to use and the Automation Preferred™ certification assures you of smooth
Maximum Operating Pressure: 350 barg, 5076 psig. Maximum Operating Temperature: 176 or 104 for filters with activated carbon elements °F. Minimum Operating Temperature: 1.5 °C, 34.7 °F. Materials of Construction: Housing: Aluminum, anodized / Seals: NBR (G3 - G7), Housing: Steel / Seals: NBR (G9 - G13)
Maximum versatility. Filters aqueous solutions or aggressive chemicals. Low protein binding membrane gives high recovery of critical proteinaceous samples. HPLC certified. Provides assurance that the filter will not add artifacts to your analysis.
Maximum Operating Temperature. 25 mm PSF: 55 ºC (131 ºF) at 2.1 bar (210 kPa, 30 psi) Maximum Operating Pressure. 13 mm: 6.3 bar (630 kPa, 90 psi) 25 mm PSF: 4.1 bar (410 kPa, 60 psi) at 21 - 24 ºC (70 - 75 ºF); 2.1 bar (210 kPa, 30 psi) at 55 ºC (131 ºF) Typical Water Flow Rate. mL/min at 0.7 bar (70 kPa, 10 psi) 13 mm, 0.2 µm: 17
Acrodisc Syringe Filters with GHP Membrane. Filter Media: Maximum Operating Temperature: 55°C (131°F) Maximum Operating Pressure: 0.2 and 0.45µm is 6.9 bar ...
Discounting ghp filters maximum operating pressure 2.1 bar The capacity of the Filter Regulator (FR) can be determined, this will bring to a 1-1/2 25 mm, Acrodisc® Syringe Filter, 0.45 µm - Pall Corporation Maximum Operating Pressure (bar) 2.1 bar 55°C.
Certified ghp membrane maximum operating pressure 2.1 bar GH Polypro (GHP) Membrane Disc Filters – Separations Maximum Operating Temperature 55 °C (131 °F) Minimum Bubble Point – Water 0.2 µm: 2.9 bar (290 kPa, 42 psi) 0.45 µm: 1.38 bar (138 k
Gold High Pressure units tap into high pressure systems, bleeding off a small amount of oil, eliminating the need for external pumps and additional power sources. Sample parts are provided for easy oil sampling. No tools necessary for element changes with T-bar style handles.
Syringe Filters - Ciro Manufacturing Corporation 13, 17, 25 & 31mm: Female luer lock inlet, male slip luer outlet Typical Hold-Up Volume (with air purge) 13 mm: 15 μL 17mm : 18 μL 25 mm: 80 μL 25 mm Prefilter: 80 μL 31 mm: 80 μL Maximum Operating Temperature 55 °C (131 °F) at 2.1 bar (210 kPa, 30 psi) Maximum Operating Pressure 13 mm: 6
