Fluid Flow Rate (GPM) Graph 2: Typical Fluid Flow Rates @ 25° C (10” NanoSHIELDTM Cartridge - 222 connector) Dierential Pressure (psid) Di˛erential Pressure (bar) 0 10 20 30 Fluid Flow Rate (LPM) 0 0 0 2 4 6 8 10 0.4 0.6 0.2 10 nm 20 nm 50 nm 100 nm 5 nm 2.0 4.0 6.0 8.0 10.0 Fluid Flow Rate (GPM) Graph 3: Typical Fluid Flow Rates @ 25° C

Maximize sample recovery – Obtain high flow rates and low non-specific protein and nucleic acid binding. Add versatility – Available in various membrane types including low-binding Bio-Inert ® (modified nylon), Supor ® (polyethersulfone), and GHP (polypropylene) membranes, as well as Omega™ (modified polyethersulfone) ultrafiltration

Maximum Liquid Flow Rate Recommended Liquid Flow Rate Double Open End Single Open End For flow rates above 90 L / min, increase the number of cartridges to be used in parallel or refer to Table 2 (large type cartridge). F l o w R a t e p e r C a r t r i d g e (L / m i n) Table 1 Capsule • Junior style 4463 Series (102 mm / 4 inch) • Double

Mini Kleenpak™ Capsule with Supor® EAV Membrane, 1 ⁄ 2 in. - 3 ⁄ 4 in. (13 mm - 19 mm), sanitary flange, supplied pre-sterilized using gamma irradiation. KA02EAVP8S 1. * Supplied in boxes of 3. 1 ‘S’ option with Code 2 connection is provided with filling bell on outlet. It is removable for in-line use.

Polyethersulfone (PES) membranes are recommended for filtering cell culture media. PES has both very low protein binding and extractables. PES also demonstrates faster flow rates than cellulosic or nylon membranes. Regenerated cellulose (RC) membranes are hydrophilic and have very good chemical resistance to solvents, including DMSO.

Sep 15, 2020 · Membrane: Expanded PTFE HIGH FLOW TETPOR II cartridges can be in All cartridges are integrity tested prior to despatch Upstream Support: Polypropylene situ steam sterilized for up to 225 cycles at by the pressure decay and aerosol challenge test Downstream Support: Polypropylene 142°C (287.6°F). methods. Values are for cartridges wetted

color-coded for a wide variety of membranes, ranging from 1 kD to 0.45 µm. • Maximize sample recovery– obtain high flow rates and low non-specific protein and nucleic acid binding with Omega™ PES membrane. • Minimize binding– low binding Bio-Inert® and GHP membranes allow the greatest recovery of samples requiring microfiltration.

With the industry’s best-available balance of retention and liquid flow rate, our membranes enable high process yields without sacrificing throughput. Microelectronics: Gore’s microfiltration membranes enable the manufacture of LED, OLED, hard disk drives and other microelectronics with higher yields and a low cost of ownership.

Supor EKV filters are 0.2 micron rated validated sterilizing-grade membrane filters. Utilizing a laid-over-pleat membrane geometry for high flow rates and throughput performance, they are designed for the most cost effective filtration of a wide range of liquids such as buffers, tissue culture media, and others.

A microporous polypropylene membrane impregnated with an organic membrane solution comprised the heart of the strip dispersion hybrid liquid membrane system. The membrane solution was made by dissolving a cationic carrier, di-(2-ethylhexyl) phosphoric acid in an inexpensive, less toxic membrane solvent, kerosene.

The second layer pair includes a second polymeric microporous membrane and a second flow channel layer oriented in a second flow direction different than the first flow direction and having a fluid inlet and a fluid outlet disposed on second opposing sides of the extraction element.

To determine the tolerance of each membrane to chemicals, white polycarbonate, MF-Millipore, cellulose acetate, hydrophilic polypropylene and hydrophilic PTFE membrane filters that had low auto-fluorescence were mounted in chambers (37 mm monitor unit; Advantec Co. Ltd., Tokyo, Japan).

Jul 25, 2021 · The high flow rates involved in high-flow nasal cannula delivers volumes of air over what a patient ventilates physiologically, which increases ventilation and allows for displacement of excess CO2 with excess O2. This allows for an increased PAO2 creating a greater oxygen diffusion gradient and potentially improving patient oxygenation.

Special polyethersulfone membrane filter cartridges with a retention rate of 0.2 μm and high flow rates and long service life for the filtration of water. BECO PROTECT CS Cellstream Feature the innovative wrapped design with adapted BECOPAD® high-purity cellulose depth filter sheet material. These filter cartridges

The present invention relates to a high flow polypropylene composition comprising (A) a low molecular weight propylene homopolymer fraction and (B) a high molecular weight propylene copolymer fraction, having a comonomer content of not higher than 8 wt %, wherein the ratio between the MFR 2 of fraction (A) and the MFR 2 of fraction (B) is at least 3 and wherein the MFR 2 of the entire composition is at least 5 g/10 min, the values of MFR 2 being measured according to ISO 1133 (230° C., 2.16