membrane for use in aqueous and non-aggressive, solvent-based mobile phases. Polypropylene housing with female Luer-Lock inlet and standard male slip Luer outlet connections. All membranes are HPLC certified for low levels of UV-absorbing extractables. Typical hold-up volume: <100µL.

TF filters are made with durable, hydrophobic polytetrafluoroethylene (PTFE) membranes in a polypropylene housing for use with organic solvents and chemically aggressive solutions. PTFE filter membrane is resistant to most solvents Available in 0.05, 0.1, 0.2, 0.45, and 1.0 µm pore sizes 0.05

Polypropylene: GF Prefilter: Binder-free borosilicate glass: Pore Size: 0.2 and 0.45µm: Effective Filtration Area: 13mm = 1.0cm 2 25mm = 2.8cm 2 25mm Premium = 3.9cm 2: Sample Volume: 13mm is <10mL 25mm is < 100mL 25mm Premium is < 150mL: Inlet/Outlet Connections: 13mm is Female Luer-Lok inlet with minispike outlet. 25mm is Female Luer-Lok inlet with male slip luer outlet

-Ideal for analytical separations -Polypropylene housing -Luer-lock inlet Small minispike outlet prevents âœair bubbleâ lock in autosampler vials and NMR tubes. For volumes up to 10mL. PALL FILTERS - vgdusa.com. GHP hydrophilic polypropylene membrane. Low protein binding. HPLC certified for low UV-absorbing extractables.

Pall Life Sciences® 4560 Acrodisc® Syringe Filters 25mm with GHP Membrane, 0.45 µm. Pore size of 0.45 µm with typical hold-up volume of \ 100µl. Made with GHP (hydrophilic polypropylene) membrane for low protein binding. Features a polypropylene housing with female Luer-lock inlet and standard male slip Luer outlet connections.

GHP Acrodisc™ has a hydrophilic polypropylene membrane. Will handle both aqueous as well as aggressive organic solvent-based solutions. Available with glass fiber (GF) prefilter for particle laden samples (EF8436C). Nylon Acrodisc™ has a 25 mm HPLC certified nonpyrogenic nylon membrane for analyzing aqueous samples. Non-autoclavable.

GH Polypro (GHP) Membrane is Extremely Low in Biomolecule Binding 125 I-labeled BSA (1.6 µg) or 32 P-labeled DNA (500 ng) were diluted to 5 mL in PBS (BSA) or Tris-EDTA (DNA) and filtered through a 13 mm disc of the indicated membrane.Filtration was carried out using a 10 mL syringe at a flow rate of 1.0 mL/min.

Syringe Filter EMD Millipore Millex-GV 0.22 µm, Natural, Hydrophilic Polyvinylidene Fluoride (PVDF), HDPE, 4 X 19.7 mm, Sterile, 0.1 cm² Filtration Area, 1 mL Volume, . 10 µL Hold-up Volume, Hydrophilic Wettability, Female Luer-Lok/Male Luer Slip, Stepped Connections, GV Filter Code, Female Luer-Lok® Fitting Inlet, Male Luer Slip Fitting Outlet Stepped, 14 bar (200 psi) Maximum Inlet

Description. Protect vacuum sources from contamination and moisture damage. With hydrophobic PTFE membranes. Polypropylene housing (except for SLFG-025-LS and -50, which have PVC housing) Variety of inlet/outlet combinations, including stepped hose barb and 1/8 NPT. Nonsterile, autoclavable, bidirectional.

Sterlitech non-sterile PTFE syringe filters stand up to the most aggressive solvent, acid and base samples. Female Luer Lok inlet, male slip outlet (50 mm hose Female Luer Lok inlet, male slip outlet (50 mm hose ...

。 Avoid the expense and inconvenience of keeping a variety of filters on hand. Versatile filter for aqueous and aggressive organic solvent-based solutions. 。 Low protein binding membrane gives high recovery of critical proteinaceous samples. 。 Accurate analysis. HPLC certified for low levels of UV-absorbing extractables.

Gel polymer electrolyte based on hydroxypropyl methyl . Feb 15, 2022 · The obtained dry membrane was made into wafer with a diameter 19 mm by a tablet machine and stored in an argon filled glove box (H 2 O . 1 ppm, O 2 1 ppm). Finally, the membranes were soaked into LE for 30 min to obtain GPE.

Exceptional temperature stability provides extended sampling range over other membranes Titan2 PTFE Syringe Filters are indicated for filtration of gaseous or organic solvent based samples. The natural hydrophobic membrane exhibits broad chemical resistance and unsurpassed temperature stability to address aggressive sample matrixes and extreme

0.45 µm, Acrodisc® Syringe Filter with PVDF Membrane, 50/pkg . Made from hydrophilic polyvinylidene fluoride (PVDF) membrane, buy 25 mm Acrodisc® syringe filters at Pall shop. They are ideally used for filtration due to their high performance membrane. 0.45 µm, Acrodisc® Syringe Filter with PVDF Membrane, 50/pkg | Pall Shop

Syringe Filter EMD Millipore Millex-GV 0.22 µm, Natural, Hydrophilic Polyvinylidene Fluoride (PVDF), HDPE, 4 X 19.7 mm, Sterile, 0.1 cm² Filtration Area, 1 mL Volume, < 10 µL Hold-up Volume, Hydrophilic Wettability, Female Luer-Lok/Male Luer Slip, Stepped Connections, GV Filter Code, Female Luer-Lok® Fitting Inlet, Male Luer Slip Fitting Outlet Stepped, 14 bar (200 psi) Maximum Inlet