Wheaton V-Vials. Compatible with the DrySyn MULTI reaction vial blocks, the Wheaton V-Vials are a popular range of vials with common sizes of 2, 5 and 10ml available. Conical interior bottoms are designed to provide total downward drainage and maximum retrieval of contents by syringe.

Vials with an 11mm, 10mm, or 9mm outer diameter will accommodate either size insert, but vials with an 8mm outer diameter can only use inserts that have a 5mm outer diameter. Reliable Quality There are many vendors offering chromatography vials and closures, however quality standards are not consistent across the market.

Aijiren vials offer the same consistent performance across the entire size range, from 15 µL to 60 mL. What’s more, they are manufactured to perform seamlessly with a variety of analytical

Aijiren 2 mL screw top vials are constructed from from Type 1 borosilicate glass, with low metal content, to protect your sample from destabilizing or leaching. The associated 9 mm screw caps come with your choice of cap septa constructed from either PTFE

Aijiren Certified Vials, and NEW Aijiren CrossLab Vials for non-Aijiren autosamplers. • Manual and autosampler syringes boost performance along every step of your sampling process. Designed for accuracy, reliability and ease of use, Aijiren syringes ensure exact measurement,

The most commonly used vials are 9mm, 12x32mm screw thread vials. A 12x32mm vial is also known as 1.5mL, 1.8mL, and 2.0mL vials by different manufacturers. Microsampling options include using a one-piece vial with fused insert molded into the vial, or using a separate insert placed into a vial. Our 13mm vials are 4mL vials

Polypropylene Vials. Aijiren polypropylene certified vials for autosampler use are translucent and chemically resistant. They are the vials of choice for pH-sensitive samples, sodium, or heavy metal analyses. Polypropylene vials come as either a snap vial style, crimp vial style, or screw vial

Standard vials with inserts have usually a volume of 150 or 200 microliter and a minimum volume of 10 microliters. For an application I would like to have single vials with a volume below 10

HPLC Vials for Sale--Lab Vials ManufacturerThe size of ND11 snap top autosampler vial is 11.6x32mm, which is made of borosilicate glass. this snap top sample vial is mainly used i 0.3mL Crimp Top Round Bottom Vial – Clear, GOLD-Grade: 03-CVG: 2mL, 12x32

Vials & Closures Catalogue Postnova Analytics GmbH Rankinestrasse 1 86899 Landsberg a. Lech Phone: 08191-985688-0 Fax: 08191-985688-99 info@postnovacominfo@postnova.com Vials, Seals andSepta Pages 3 –5 SolutionKitsfor PostnovaField

USP, Isotonic Liquid, Preservative Free, for single use only, is available in 10 mg/mL, 2 mL (20 mg) vials and 25 mg/mL, 20 mL (500 mg), 40 mL (1 g) and 100 mL (2.5 g) vials. Each 10 mg/mL, 2 mL vial contains methotrexate sodium equivalent to 20 mg

Autosampler vials may seem insignificant when compared to the sophisticated analytical instrumentation most laboratories use, but the incorrect vial, cap or septa can contribute to

2021/4/8 · 2mL Autosampler vials are the most common vial type. If you have a limited amount of sample, you can use a 2mL autosampler vial with a compatible vial insert. Vial inserts come in different designs: Tapered inserts hold up to 250µL of sample and allow

Chromatography Vials. Designed to use separating organic and inorganic compounds for analysis, chromatography vials come in different finishes to guarantee chemical compatibility. Autosampler compatible closures come in different colors, sizes, and septa materials. Offered with a write-on patch, possible identification errors are eliminated.

5. After the vial has been opened and material prepared it should be stabile during the period of use 6. The control material should be ready to use and require minimal preparation 7. Convenient sizes of aliquots/vials can be prepared and vial-to-vial variability 8. It 9.